If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
teach me! how to reset bizhub c220 / c280 / c360 fuser, transfer belts counter reset?
Re: teach me! how to reset bizhub c220 / c280 / c360 fuser, transfer belts counter re
The transfer belt and fuser require only a knowledgeable tech to reset no fuses or special gear required. The PPLM firmware can also be installed by a qualified tech then set to not display the end of life messages.
Online Store is closed. Chip resetting is a thing of the past! Thank you to all my past customers. Now into Ip TV KODI Boxes
Re: teach me! how to reset bizhub c220 / c280 / c360 fuser, transfer belts counter re
Originally posted by ogaliandy
Hi,
go to service mode, then counter, then life, then new release, that should reset the fuser and transfer belt,
Bad idea...now you've told the MFP that you have installed new parts...It's going to cause some big CQ issues..the PPLM firmware is a better idea. EMujo
If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.
Re: teach me! how to reset bizhub c220 / c280 / c360 fuser, transfer belts counter re
Originally posted by HoonBoy
Don't forget to open the front cover, select fuser or transferbelt and hit start button.
thanks a million hoon boy!
saved me a newbie a tonne of money!
successfully replaced the teflon, thermo , ITB and fuser roller to an old 360 konika
now running as good as new!!
Re: teach me! how to reset bizhub c220 / c280 / c360 fuser, transfer belts counter re
Originally posted by emujo2
Woo hoo, you just replied to a 9 year old post..I can verify one of these guys is dead, and maybe most of them. E
Oh! Thanks. Just to show The good that we do lives on long after we are gone!
9 years later, it's the thread that taught my thick head I had to open the cover for the settings to work!
As a newbie I need time to learn how to navigate these threads as they are super valuable
Re: teach me! how to reset bizhub c220 / c280 / c360 fuser, transfer belts counter re
Originally posted by mgakono
Oh! Thanks. Just to show The good that we do lives on long after we are gone!
9 years later, it's the thread that taught my thick head I had to open the cover for the settings to work!
As a newbie I need time to learn how to navigate these threads as they are super valuable
Mucho gracias!
Since you saved all that money why not contribute a few dollars to this website?
Comment