Konica Minolta parts requirement

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • selmila
    Trusted Tech

    100+ Posts
    • Aug 2012
    • 133

    Konica Minolta parts requirement

    HI
    I will be needing Konica Minolat parts of C-6501,C-360,C-253,C-250,C-250,C-450,C-352,C-351.
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22662

    #2
    Re: Konica Minolta parts requirement

    Congratulations. Did you have a question? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

    Comment

    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9919

      #3
      Re: Konica Minolta parts requirement

      You can't buy parts here.

      Comment

      • Hansoon
        Field Supervisor

        Site Contributor
        2,500+ Posts
        • Sep 2007
        • 3273

        #4
        Re: Konica Minolta parts requirement

        Minolat parts are scare these days....

        Hans
        " Sent from my Intel 80286 using MS-DOS 2.0 "

        Comment

        • emujo
          Field Supervisor

          2,500+ Posts
          • Jun 2009
          • 3009

          #5
          Re: Konica Minolta parts requirement

          Originally posted by Hansoon
          Minolat parts are scare these days....

          Hans
          Good, but if you're going to opt for the spelling comment, you should check your own 1st..."Scare"
          If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

          Comment

          • Hansoon
            Field Supervisor

            Site Contributor
            2,500+ Posts
            • Sep 2007
            • 3273

            #6
            Re: Konica Minolta parts requirement

            Minolat parts are scare these days....
            Did I really write this? SCARCE it is of course.

            Must be all the fault of my keyboard...........

            Hans
            " Sent from my Intel 80286 using MS-DOS 2.0 "

            Comment

            • mrwho
              Major Asshole!

              Site Contributor
              2,500+ Posts
              • Apr 2009
              • 4303

              #7
              Re: Konica Minolta parts requirement

              Originally posted by Hansoon
              Did I really write this? SCARCE it is of course.

              Must be all the fault of my keyboard...........

              Hans
              Didn't think that was a typo - Minolta's scare the shit out of me nowadays!
              ' "But the salesman said . . ." The salesman's an asshole!'
              Mascan42

              'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'

              Ibid

              I'm just an ex-tech lurking around and spreading disinformation!

              Comment

              • fixthecopier
                ALIEN OVERLORD

                2,500+ Posts
                • Apr 2008
                • 4714

                #8
                Re: Konica Minolta parts requirement

                Originally posted by mrwho
                Didn't think that was a typo - Minolta's scare the shit out of me nowadays!

                Careful, don't show fear to the customer. I let them know that office equipment fears me!
                The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking

                Comment

                • Hansoon
                  Field Supervisor

                  Site Contributor
                  2,500+ Posts
                  • Sep 2007
                  • 3273

                  #9
                  Re: Konica Minolta parts requirement

                  Didn't think that was a typo - Minolta's scare the shit out of me nowadays!
                  Those with a Konica background YES!

                  Hans
                  " Sent from my Intel 80286 using MS-DOS 2.0 "

                  Comment

                  • mrwho
                    Major Asshole!

                    Site Contributor
                    2,500+ Posts
                    • Apr 2009
                    • 4303

                    #10
                    Re: Konica Minolta parts requirement

                    Originally posted by Hansoon
                    Those with a Konica background YES!

                    Hans
                    Finally someone who understands me!
                    ' "But the salesman said . . ." The salesman's an asshole!'
                    Mascan42

                    'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'

                    Ibid

                    I'm just an ex-tech lurking around and spreading disinformation!

                    Comment

                    Working...