BH-C-253 with FS-519, Punch Kit

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Hansoon
    Field Supervisor
    Site Contributor
    2,500+ Posts
    • Sep 2007
    • 3237
    #1

    BH-C-253 with FS-519, Punch Kit

    BH-C-253 with FS-519, Punch Kit.

    Can the PK-510 being used with the FS-519 embedded finisher instead of the original intended PK-515?

    Hans
    " Sent from my Intel 80286 using MS-DOS 2.0 "
    Tags: None
    • blackcat4866
      Master Of The Obvious
      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22545
      #2
      Re: BH-C-253 with FS-519, Punch Kit

      According to my manual the FS-519 requires a PK-501. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • Hansoon
          Field Supervisor
          Site Contributor
          2,500+ Posts
          • Sep 2007
          • 3237
          #3
          Re: BH-C-253 with FS-519, Punch Kit

          Here is says PK-515. Perhaps difference between Inch/Metric versions?

          Hans
          " Sent from my Intel 80286 using MS-DOS 2.0 "

            Comment

            • EarthKmTech
              Step aside, noob
              1,000+ Posts
              • May 2009
              • 2141
              #4
              Re: BH-C-253 with FS-519, Punch Kit

              imperial and metric punch kits are always different part numbers.

                Comment

                Previous template Next
                Working...