Mita DC-5686

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Spank6482
    Technician

    50+ Posts
    • Feb 2005
    • 66
    #1

    Mita DC-5686

    I have a machine that ejects the originals out of the document feeder about 5 times faster then normal. I tried the RADF main board and that didn\'t work. does anyone have a clue for me and this 15 year old workhorse.

    Tags: 685, clue, covers, dc5686, document, ess, faster, feeder, harness, help, issue, long, main, mita, normal, off, old, one, originals, pinched, radf, screwed, talking, time, wiring, work, workhorse
    • 10871087
      Service Manager

      1,000+ Posts
      • Jan 2005
      • 1143
      #2
      Re:Mita DC-5686

      I think your talking about a 5685. I haven\'t worked on one for a long time but I remember a problem in the wiring harness to the RADF causing a similar issue.

        Comment

        • cboucher
          • May 2025
          #3
          Re:Mita DC-5686

          Start taking off covers and look for a pinched wire touching a frame. Good luck...

            Comment

            • Spank6482
              Technician

              50+ Posts
              • Feb 2005
              • 66
              #4
              Re:Mita DC-5685

              it was something in the wiring harness, I reseated both ends of the wiring harness and cleaned up the contacts on the in-line fuse holder. I don\'t know what was screwed up but it\'s working now.

              Thanks for everyones help.

                Comment

                Previous template Next
                Working...