C6500 C-5003 and now 6101

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jzheld
    Trusted Tech
    • Sep 2010
    • 162
    #1

    [Dead] C6500 C-5003 and now 6101

    Machine started fine in the morning after few hours of work it just stopped and I got 5003, started to check all the cables and connectors got 6101, checked the scanner sensor and it is in working order.

    Any ideas what else it could be?
    Tags: c6500 5003 6101
    • laitang
      Senior Tech

      500+ Posts
      • Nov 2012
      • 627
      #2
      Re: C6500 C-5003 and now 6101

      Check 24v output of DC power unit/2 [6]

      BIZHUB-C6500_DCPS.JPG

        Comment

        • jzheld
          Trusted Tech
          • Sep 2010
          • 162
          #3
          Re: C6500 C-5003 and now 6101

          Originally posted by laitang
          Check 24v output of DC power unit/2 [6]

          [ATTACH=CONFIG]26425[/ATTACH]

          thank man, i just check it, if I understand correctly the output is on the top of the board? and what is the voltage supposed to be? the 6 points at the bottom of the board, but i can't see any outputs there

            Comment

            • jzheld
              Trusted Tech
              • Sep 2010
              • 162
              #4
              Re: C6500 C-5003 and now 6101

              Originally posted by laitang
              Check 24v output of DC power unit/2 [6]

              [ATTACH=CONFIG]26425[/ATTACH]
              Out put one doesn't change after error code comes up
              IMG_20140916_113021.jpg
              Output 2
              IMG_20140916_113514.jpg
              Than it changing to this
              IMG_20140916_113041.jpg

                Comment

                • jzheld
                  Trusted Tech
                  • Sep 2010
                  • 162
                  #5
                  Re: C6500 C-5003 and now 6101

                  Originally posted by jzheld
                  Out put one doesn't change after error code comes up
                  [ATTACH=CONFIG]26429[/ATTACH]
                  Output 2
                  [ATTACH=CONFIG]26430[/ATTACH]
                  Than it changing to this
                  [ATTACH=CONFIG]26431[/ATTACH]
                  so clearly I don't have 24 output

                    Comment

                    • laitang
                      Senior Tech

                      500+ Posts
                      • Nov 2012
                      • 627
                      #6
                      Re: C6500 C-5003 and now 6101

                      From DC Power supply 2 CN115 (7pin) to Conveyance drive board CN507 (6pin)
                      CN115-1 (24V) -> CN507-1
                      CN115-2 (24V) -> CN507-2
                      CN115-3 (GND) -> CN507-3
                      CN115-4 (GND) -> CN507-4

                        Comment

                        • jzheld
                          Trusted Tech
                          • Sep 2010
                          • 162
                          #7
                          Re: C6500 C-5003 and now 6101

                          Originally posted by laitang
                          From DC Power supply 2 CN115 (7pin) to Conveyance drive board CN507 (6pin)
                          CN115-1 (24V) -> CN507-1
                          CN115-2 (24V) -> CN507-2
                          CN115-3 (GND) -> CN507-3
                          CN115-4 (GND) -> CN507-4

                          Thanks man, iI'm getting 1.5V from there, I guess power supply died, or could it be something else?

                            Comment

                            • jzheld
                              Trusted Tech
                              • Sep 2010
                              • 162
                              #8
                              Re: C6500 C-5003 and now 6101

                              Originally posted by laitang
                              From DC Power supply 2 CN115 (7pin) to Conveyance drive board CN507 (6pin)
                              CN115-1 (24V) -> CN507-1
                              CN115-2 (24V) -> CN507-2
                              CN115-3 (GND) -> CN507-3
                              CN115-4 (GND) -> CN507-4
                              Just don't want to get a new board and keep getting an error code. If you have any ideas that it might be something else let me know. I already changed Conveyance drive board, one ICP was bad.

                              Thank you.

                                Comment

                                Previous template Next
                                Working...