PDA

View Full Version : BizHub C35


Custom Search


Cookr
02-13-2015, 03:06 PM
Working on customers BH C35 and they are getting a line down the page ONLY on copies and ONLY from the ADF copies just fine from glass and prints just fine also when you make a B&W copy its leaves a black line and if you make a color copy it leaves a magenta line. I have checked all the IU they look fine and also swapped out the belt with a used one and it did the same thing exact same spot, I have cleaned the glass and the slip also the laser lens under the IU's. Any Ideas? Thanks

Cookr
02-13-2015, 03:15 PM
Here is a Photo of it

28002

Zeldaman
02-13-2015, 03:20 PM
Hi there!
100% dust/dirt on the scanner. You have to open it (see service-manual) and clean it carefully.
Greetings...

Cookr
02-13-2015, 03:24 PM
Hi there!
100% dust/dirt on the scanner. You have to open it (see service-manual) and clean it carefully.
Greetings...

OK. I'll give that a try but wouldn't affect it when I make a copy off the glass?

Zeldaman
02-13-2015, 03:26 PM
Hi there!
Nope, only via DF.
Greetings...

allan
02-13-2015, 05:32 PM
I will second that, Its on your slit glass or optics. Cleaning will fix this.

Cookr
02-13-2015, 08:04 PM
That was it thanks

Custom Search