Hi guys
I have an IRC5185 with Blurry printer. This problem occur with copier and printe. I replaced the transfer belt, the drum, I cleaned the tranfer belt unit, and the machine interior, any ideas?
Hi guys
I have an IRC5185 with Blurry printer. This problem occur with copier and printe. I replaced the transfer belt, the drum, I cleaned the tranfer belt unit, and the machine interior, any ideas?
Blurred image,double image,smeared image.Post a picture of test print please and i believe you can get answer in a sec.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
post copies of the issue-
post PG6's Grid pattern-this will indicate direction & if it is on single color or multiple colors
is the issue paper feed>
(sub-scan/or cross-feed(main scan) ??
click on pics for a better view
SUB SCAN.JPGMAIN SCAN.JPG
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Sample.jpg
This is the sample, and this copy was made on single color (black), if I send a print, the problem persist, and if I change the single color, (cyan, magenta), the prblem is same.
your posted images are terrible/looks washed out/-also looks like a transfer issue on top of blur
did u look at my description of paper feed area location above ?
is your posted image paper feed (RIGHT to LEFT)?
or cross-feed-(FRONT to REAR)of Printer
there is a Front to Read issue adjustment/only if u have v79.01 firmware installed-called REG-SPD, REG-SPD2 and REG-SPD3/
see pdf>open this>>iR5180 Blur_Miss Reg TP09-10.pdf
here is another tech.pub from other another poster>iRC5180_Color_Shift_Prevention _&_Correction.pdf
Print out the PG6 -GRID PATTERN/ located in service mode-
faulty Gears or ITB Motor
Swing unitl.JPG
Last edited by teckat; 09-05-2011 at 06:16 PM.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks