Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Oct 2012
    Location
    Belize
    Posts
    137
    Rep Power
    0

    RZ-220 Error codes

    Came across an RZ220 displaying error codes D04-560 & D17-237.

    Check the meaning of the codes and troubleshoot. Did not find any cut wires. Replace print cylinder with a working one but error codes remains.

    Just want to ensure that such an issue is caused by the Mech_Ctrl PCB before I order a new one because they are very expensive.

  2. #2
    Senior Tech 250+ Posts 20gaugeO/U's Avatar
    Join Date
    Feb 2009
    Posts
    495
    Rep Power
    31

    Re: RZ-220 Error codes

    Are you using generic ink and masters??? Seems odd both RF tags have failed

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Oct 2012
    Location
    Belize
    Posts
    137
    Rep Power
    0

    Re: RZ-220 Error codes

    no generic. ink and master are OEM.

  4. #4
    Senior Tech 250+ Posts 20gaugeO/U's Avatar
    Join Date
    Feb 2009
    Posts
    495
    Rep Power
    31

    Re: RZ-220 Error codes

    Only time I've had an RF issue was on a new machine where the master roll sensor connector had popped out in shipping transport. You've already tried a new drum, have you tried different ink and masters from a different lot number? Had a few very low volume machines where the ink was in the machine for so long it made them change it out even though it was still 1/3 full...

    Otherwise cut tie wraps and reseat all connectors before ordering a new (different) board. They are old enough you should be able to find a used one

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here