FS534 Jammed stapler cartridge. FYI

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • habik
    Service Manager
    Site Contributor
    1,000+ Posts
    • Apr 2010
    • 2015
    #1

    FS534 Jammed stapler cartridge. FYI

    Had a cartridge stuck and couldn't get it out by turning the clincher mechanism both ways. So to release it I used a piece of mylar to stick it under.
    First you pull cartridge out to the max, then slide the mylar under cca 70mm then push the cartridge with the mylar together all the way in cca 80mm then slide out as usual. See pic below
    The culprit is the feed tong that wont remain in the "No feed position"


    Byting on bits.
    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE
    Tags: None
    • blackcat4866
      Master Of The Obvious
      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22545
      #2
      Re: FS534 Jammed stapler cartridge. FYI

      I've done the same thing with my pocket scale (150mm ruler). =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        Previous template Next
        Working...