Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1

    Error code c-13c8 after new transfer belt fuse

    Hi all, my machine is down and hopefully someone can help. I got a message on my Bizhub C350 telling me to change the transfer belt. So I did some reading and changed the fuse in the transfer belt unit. When I reinstalled it, the machine came back with the error code c-13c8. Can someone tell me what this code is and how can I clear it?

  2. #2
    A new installation is not detected when a new Transfer Cleaner Unit (Image Transfer Belt Unit) is installed.
    Change PWB-MC, the Control Board (PWB-MC)

  3. #3


    Thank you for the reply. I'm happy to report that it's alive! And I must admit that I trusted someone where you should always double check. I purchased the fuses from a source I normally don't use. Needless to say, he gave me the wrong fuses. I received 800ma instead of 80ma fuses. Once the correct fuse was in place, it fired right up. Again, thanks for your help.

  4. #4
    All things Konica Minolta 1,000+ Posts Stirton.M's Avatar
    Join Date
    Oct 2009
    Rep Power
    I was just gonna mention to ensure your fuse is the correct value...that code is related to it not popping when it should. 1/16th Amp pico fuses.
    "Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
    ---Groucho Marx

    Please do not PM me for questions related to Konica Minolta hardware.
    I will not answer requests or questions there.
    Please ask in the KM forum for the benefit of others to see the question and give their input.

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=

IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here