aficio mp c 305

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Marwanalhajbi
    Technician
    • Jul 2018
    • 72
    #1

    aficio mp c 305

    it works just fine throw bypass but in try one it jam ,one paper stuck on fuser and the other jam on the try,it shows like they met in front of itb then it shows j057

    any suggestions,thanks alot
    Tags: front, jam, shows, suggestions
    • Phil B.
      Field Supervisor
      10,000+ Posts
      • Jul 2016
      • 22810
      #2
      Re: aficio mp c 305

      Originally posted by Marwanalhajbi
      it works just fine throw bypass but in try one it jam ,one paper stuck on fuser and the other jam on the try,it shows like they met in front of itb then it shows j057

      any suggestions,thanks alot
      get a service manual

      make sure your paper size and type match what the machine thinks it has in it

        Comment

        • FrohnB
          Service Manager
          Site Contributor
          1,000+ Posts
          • Jul 2017
          • 1919
          #3
          Re: aficio mp c 305

          Originally posted by Phil B.
          get a service manual

          make sure your paper size and type match what the machine thinks it has in it
          +1 on this. Make sure the size isn't "hard set" in user tools.
          Paper loaded correctly?
          Make sure the little gray end fence and your side fences are in correct position (should be touching the stack of paper).
          Feed Roller Cleaned? Transport sensors cleaned?

          These are literally the only things it could be!
          Omertà

            Comment

            • slimslob
              Retired
              Site Contributor
              25,000+ Posts
              • May 2013
              • 34639
              #4
              Re: aficio mp c 305

              J057 is a trail edge lag. Either the paper in tray 1 is longer than what the size is set for or you are have problems with paper separation on tray 1.

                Comment

                • mga
                  Copier Technician
                  Site Contributor
                  1,000+ Posts
                  • Dec 2010
                  • 1393
                  #5
                  Re: aficio mp c 305

                  Originally posted by slimslob
                  J057 is a trail edge lag. Either the paper in tray 1 is longer than what the size is set for or you are have problems with paper separation on tray 1.
                  +1 all replies sound to be likely problem
                  Regards Mark

                  FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

                  RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

                  https://copierservices.simdif.com

                    Comment

                    • nirvaner
                      Junior Member
                      • Sep 2013
                      • 5
                      #6
                      Re: aficio mp c 305

                      Hello everybody.
                      I had this problem the other week, and after tests and more tests, exchanges and more exchanges, I solved the problem with a paper feed clutch. There is an engine that feeds the paper circuit and next to that engine is a series of clutches, the paper feed was the one that was causing this. He pulled a leaf and didn't hang up in time and started pulling the second.

                        Comment

                        • DBB185
                          Junior Member
                          • Jul 2018
                          • 4
                          #7
                          Re: aficio mp c 305

                          Is there an easy wat to get the paper feed clutch out? It looks like it is behind the PSU and you basically have to remove everything to get to it.

                            Comment

                            • nirvaner
                              Junior Member
                              • Sep 2013
                              • 5
                              #8
                              Re: aficio mp c 305

                              Originally posted by DBB185
                              Is there an easy wat to get the paper feed clutch out? It looks like it is behind the PSU and you basically have to remove everything to get to it.
                              yes it is a bit annoying to get there
                              1. Controller box
                              2. PSU
                              3. Fusing motor
                              4. Paper transport motor
                              5. HVPS (PCDU)
                              6. ITB
                              7. Paper transport unit

                                Comment

                                Previous template Next
                                Working...