Mpc3504 controller on a Mpc2004ex

[Codex]

Hello

I have a Mpc2004ex with an blown controller (sc672, tried HDD, Ram etc etc), i'm wondering if the mpc3504 controller fits on a Mpc2004ex

Inviato dal mio SM-G935F utilizzando Tapatalk

[Oze]

Hello

I have a Mpc2004ex with an blown controller (sc672, tried HDD, Ram etc etc), i'm wondering if the mpc3594 controller fits on a Mpc2004ex

Inviato dal mio SM-G935F utilizzando Tapatalk

Nope...you'll get a model mismatch SC if you try.

[Codex]

Are there no dip switch settings? I remeber long time ago in a B/w machine.. I had to put a dip switch to "1" to fit a controller from another machine (from 25ppm to 35ppm)....i think it didn't work on the newer machines.

Inviato dal mio SM-G935F utilizzando Tapatalk

[davel]

Won’t work and make sure you order EX controller.

[copier tech]

Hello

I have a Mpc2004ex with an blown controller (sc672, tried HDD, Ram etc etc), i'm wondering if the mpc3504 controller fits on a Mpc2004ex

Inviato dal mio SM-G935F utilizzando Tapatalk

BCU is the same but not the controller there is a bulletin on the differences between the ex & non ex models.

ex Controller.pdf

[mga]

Hello

I have a Mpc2004ex with an blown controller (sc672, tried HDD, Ram etc etc), i'm wondering if the mpc3504 controller fits on a Mpc2004ex

Inviato dal mio SM-G935F utilizzando Tapatalk

No

[copier tech]

No

I got this.

[arahael]

Study technical biuletin about it RD239053a