[Misc] IM C6000 internal exit tray 1

[jrob416]

Does anyone have the part number for the internal exit tray that has to be removed when installing a bridge unit or any of the internal finisher options? We have a customer that doesn't need a finisher of any kind, so we will be removing the bridge unit currently installed and would like to install the original internal tray to dress out the machine before delivery. Thanks for any assistance given.

[slimslob]

Re: IM C6000 internal exit tray 1

Have you tried the Parts Catalog? BTW it is not an exterior part. It is an Exit Unit Assembly part. I don't have the IM parts catalog but with the 03 and 04 it was catalog section U012.

[jrob416]

Re: IM C6000 internal exit tray 1

Have you tried the Parts Catalog? BTW it is not an exterior part. It is an Exit Unit Assembly part. I don't have the IM parts catalog but with the 03 and 04 it was catalog section U012.

[DRichard]

Re: IM C6000 internal exit tray 1

Thank you. I do have the PM and SM, just didn’t think to look in that section. I appreciate the response.

A friendly point...if you look in a parts manual and don't find what you're looking for where you expect it to be, don't just stop looking. I have spent a lot of extra time going through ENTIRE manuals looking for something that I knew should be there. Manufacturers aren't always logical in how their info is organized or listed.

[copier tech]

Re: IM C6000 internal exit tray 1

Does anyone have the part number for the internal exit tray that has to be removed when installing a bridge unit or any of the internal finisher options? We have a customer that doesn't need a finisher of any kind, so we will be removing the bridge unit currently installed and would like to install the original internal tray to dress out the machine before delivery. Thanks for any assistance given.

Is this item 38 you are referring to ?


Tray Reverse.pdf

And item 69 ?

Tray Exit.pdf

[slimslob]

Re: IM C6000 internal exit tray 1

Is this item 38 you are referring to ?


[ATTACH]57205[/ATTACH]

No, he is asking about the standard exit tray that is removed to install the bridge unit for an external finisher. It is shown in the parts catalogs for previous models as "Tray exit" not "Tray Reverse"

[slimslob]

Re: IM C6000 internal exit tray 1

Is this item 38 you are referring to ?


[ATTACH]57205[/ATTACH]

And item 69 ?

[ATTACH]57206[/ATTACH]

Item 69 is it.

[Gift]

Re: IM C6000 internal exit tray 1

According to the Parts Finder you should order these parts if you wan't a complete exit tray:

M0AJ4497 TRAY:EXIT
D2414472 END FENCE:TRAY:EXIT:ASS'Y

[DRichard]

Re: IM C6000 internal exit tray 1

According to the Parts Finder you should order these parts if you wan't a complete exit tray:

M0AJ4497 TRAY:EXIT
D2414472 END FENCE:TRAY:EXIT:ASS'Y

...and don't forget the internal connector cover in the back rear of the exit area and the full-sized left-end cover that you replace with the short cover. You also need the original style fuser exit roller assy.

[Gift]

Re: IM C6000 internal exit tray 1

...and don't forget the internal connector cover in the back rear of the exit area and the full-sized left-end cover that you replace with the short cover. You also need the original style fuser exit roller assy.

Oh yes, I think the missing cover wouldn't be noticed but the rollers are pretty important to prevent messy paper exit behaviour.