ProC5200 finisher sr5080

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dalewb74
    Service Manager

    Site Contributor
    1,000+ Posts
    • Feb 2018
    • 1125
    #1

    ProC5200 finisher sr5080

    ProC5200 finisher sr5080 issue. it doesn't fold in the proper position. the settings on the PC for the print job are set correctly. i did find a spring that came off of the jogger. got it back into position. the fold should be in the middle of the document. but it seems to fold as if it were doing a tri-fold. but only in one position, not both. i have lubricated the shafts located around the saddle stitch staple unit. i am also looking around on ricohs website for an actual service manual for the finisher itself. anyone got any suggestions on what else i might do? thanks
    Tags: finisher, fold, position, proc5200, sr5080
    • slimslob
      Retired

      Site Contributor
      25,000+ Posts
      • May 2013
      • 36890
      #2
      Re: ProC5200 finisher sr5080

      Which Ricoh website? If you have access to rfg-esource, go there and search SR5080. That should bring should everything related to that finisher. Everything listed on TSRC is stored on rfg-esource but TSRC does not link to everything on rfg-esource

      There should also be fold position adjustments in the C5200 service manual SP settings and in the Skilled Operator manual. My guess is that someone has been playing around in the Skilled Operator settings.

        Comment

        • dalewb74
          Service Manager

          Site Contributor
          1,000+ Posts
          • Feb 2018
          • 1125
          #3
          Re: ProC5200 finisher sr5080

          Originally posted by slimslob
          Which Ricoh website? If you have access to rfg-esource, go there and search SR5080. That should bring should everything related to that finisher. Everything listed on TSRC is stored on rfg-esource but TSRC does not link to everything on rfg-esource

          There should also be fold position adjustments in the C5200 service manual SP settings and in the Skilled Operator manual. My guess is that someone has been playing around in the Skilled Operator settings.
          thanks for the info. yes i can access both rfg and tsrc sites. i don't recall hearing of the skilled operator settings before, can you clarify please? and since i don't know how to adjust it, i don't believe the lady running the jobs has an idea what that is. feel free to send me a private message, if needed. i don't believe in posting things that should not be made to the general public.

            Comment

            • slimslob
              Retired

              Site Contributor
              25,000+ Posts
              • May 2013
              • 36890
              #4
              Re: ProC5200 finisher sr5080

              Originally posted by dalewb74
              thanks for the info. yes i can access both rfg and tsrc sites. i don't recall hearing of the skilled operator settings before, can you clarify please? and since i don't know how to adjust it, i don't believe the lady running the jobs has an idea what that is. feel free to send me a private message, if needed. i don't believe in posting things that should not be made to the general public.
              The CIP training manual for Skilled Operators might be referenced in the Product Support Guide for the C5200. Hard copy should be included in the TCRU Kits (Trained Customer Replacement Units). Should be available from rfg. If you can't find it, PM me and I will send a link top where I found it, being retired I no longer have access to Ricoh-USA technician sites.

                Comment

                • dalewb74
                  Service Manager

                  Site Contributor
                  1,000+ Posts
                  • Feb 2018
                  • 1125
                  #5
                  Re: ProC5200 finisher sr5080

                  Originally posted by slimslob
                  The CIP training manual for Skilled Operators might be referenced in the Product Support Guide for the C5200. Hard copy should be included in the TCRU Kits (Trained Customer Replacement Units). Should be available from rfg. If you can't find it, PM me and I will send a link top where I found it, being retired I no longer have access to Ricoh-USA technician sites.

                  thanks for the info. i found a copy of the service manual.

                    Comment

                    Previous template Next
                    Working...