Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 10 of 10
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Sep 2016
    Location
    littleton, colo
    Posts
    82
    Rep Power
    8

    sharp desk mx-de14

    Just got machine in today. tray 2 thru 4 jams every time. Removed back panel and it has a flashing red led light. Does that mean it notice that there a problem Tested sensor from the control panel and no luck. Checked connectors and all good there. machine say that its there. Any help would be nice. Thanks

  2. #2
    Field Supervisor 500+ Posts
    sharp desk mx-de14

    mansart's Avatar
    Join Date
    Apr 2009
    Posts
    569
    Rep Power
    39

    Re: sharp desk mx-de14

    I'm assuming an MXB355/455 type machine.....

    Machine feeds fine from bypass and tray 1

    When the jam occurs is it same place everytime?

    Is there any noticible damage to lead edge?

    SIM 7 misfeed disable......will it pass paper from CS14?

    If it will -pass paper with misfeed detect disabled you are looking at a sensor/signal trouble,

    If it won't pass paper you are looking at mechanical.

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Sep 2016
    Location
    littleton, colo
    Posts
    82
    Rep Power
    8

    Re: sharp desk mx-de14

    Its a sharp mx2615n copier.Thanks

  4. #4
    Field Supervisor 500+ Posts
    sharp desk mx-de14

    mansart's Avatar
    Join Date
    Apr 2009
    Posts
    569
    Rep Power
    39

    Re: sharp desk mx-de14

    Oh ok sorry......same basic theory.....

    What is the jam code that results?

    Will it pass paper with SIM 7 Misfeed detect disabled?

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Sep 2016
    Location
    littleton, colo
    Posts
    82
    Rep Power
    8

    Re: sharp desk mx-de14

    with the misfeed turn off it will pass paper from the tray.

  6. #6
    Field Supervisor 500+ Posts
    sharp desk mx-de14

    mansart's Avatar
    Join Date
    Apr 2009
    Posts
    569
    Rep Power
    39

    Re: sharp desk mx-de14

    So looking like sensor issue.....

    Run a 22-6 and what are the most recent Jam codes?

  7. #7
    Trusted Tech 50+ Posts
    Join Date
    Sep 2016
    Location
    littleton, colo
    Posts
    82
    Rep Power
    8

    Re: sharp desk mx-de14

    alot of tray 3. and Dpfd1-n4 not sure of that one

  8. #8
    Field Supervisor 500+ Posts
    sharp desk mx-de14

    mansart's Avatar
    Join Date
    Apr 2009
    Posts
    569
    Rep Power
    39

    Re: sharp desk mx-de14

    post a copy of the 22-6

    page 1

  9. #9
    Senior Tech 250+ Posts spanky's Avatar
    Join Date
    Sep 2012
    Location
    Md
    Posts
    332
    Rep Power
    21

    Re: sharp desk mx-de14

    D1PPD not reached.

    See attached diagram.
    Attached Files Attached Files

  10. #10
    Trusted Tech 50+ Posts
    Join Date
    Sep 2016
    Location
    littleton, colo
    Posts
    82
    Rep Power
    8

    Re: sharp desk mx-de14

    Thanks for all the help. it turn out to be 2 sensors bad. replaced and ll is running. Strange machine on has 25k on it.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here