Can someone help me out? We have an old e-studio 457 that we've replaced a bunch of parts on, now we need to reformat the HD and reinstall firmware....thanks!
-
-
Re: e-studio 457 error message F101 .... need firmware!
If that list didn't include the HDD, that's what you should have done first. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Re: e-studio 457 error message F101 .... need firmware!
How old is firmware on machine? Why do you need to format HDD?
Just asking because if you just want to set machine back to factory defaults there is 08 codes to do this! Only if firmware is at a newer level.
SORRY!
brain fart!Last edited by Thayer; 04-23-2023, 02:08 AM.Comment
-
Re: e-studio 457 error message F101 .... need firmware!
Well, I had researched the F101 error, sounded like a hard drive error, then I found a video on how to fix it....they say to reformat hard drive, then reload firmware from flash drive. If there's an easier way, please share it with me....Comment
-
Re: e-studio 457 error message F101 .... need firmware!
Did you come here to get good advice? This is it:
Reformatting the HDD then reloading firmware will not solve a F101.
Replacing the HDD then reloading the firmware will solve your F101. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: e-studio 457 error message F101 .... need firmware!
OK, thanks. I'll replace HD, then what about firmware....do I still need it to reload on replacement HD via flash drive?Comment
-
Re: e-studio 457 error message F101 .... need firmware!
Yes, correct. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: e-studio 457 error message F101 .... need firmware!
OK, so once I have HD replaced, can you point me in the right direction to download firmware?Comment
Comment