Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Junior Member
    Join Date
    Jan 2016
    Ellicott City, MD
    Rep Power

    Xerox 700 077-113 fault code

    Hello, wondered if anyone can quickly tell me where to locate the IOT Exit Sensor in the main unit. I just purchased a Xerox 700, have it all set up and paper leaving the main unit stops as it is entering the Interface Module and says it is jammed. The fault code is Xerox 700 077-113 which is the "IOT Exit Sensor did not turn off at the specified time in non-invert mode." I'm assuming that the sensor is an actuator and possible needs to be cleaned or changed. I need to get this machine up and running ASAP. Any help is so appreciated!

  2. #2
    Junior Member
    Join Date
    Sep 2019
    Rep Power

    Re: Xerox 700 077-113 fault code

    Did you fix the problem? How? I'm having the same problem with the same fault code but only with 300gsm paper

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=

IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here