Results 1 to 3 of 3
  1. #1
    Trusted Tech 50+ Posts Thayer's Avatar
    Join Date
    Dec 2017
    Location
    Burton, MI
    Posts
    56
    Rep Power
    6

    Xerox Phaser 7100dn

    Hello,
    Not a Xerox tech!
    I replaced a customers fuser unit and now it asking to reser fuser unit, How do I access service mode to reset? or do I need special software?

    Any help would be great.
    Thanks

  2. #2
    Senior Tech 100+ Posts
    Xerox Phaser 7100dn


    Join Date
    Feb 2011
    Location
    West Palm Beach, Fl.
    Posts
    219
    Rep Power
    24

    Re: Xerox Phaser 7100dn

    Well like you said you are not a Xerox Tech, so I don't know if you will or wont follow what I am going to tell you.
    1. Go into Xerox diagnostics.

    Entering Service Diagnostics
    1. Press and hold Right Arrow.
    2. Press and hold Left Arrow.
    3. Release both buttons.
    4. Press Online within 3 seconds. The Diagnostics Preventive Diag screen appears.

    NEXT

    1. Press Right Arrow to display Preventive Diag DC122 SDHistory.
    2. Press Down Arrow and navigate to Preventive Diag DC135 HFSI.
    3. Press Right Arrow and navigate to DC135 HFSI ResetCurrentVal.
    4. Press Right Arrow and navigate to Reset Current Val 000-000 screen.

    NEXT

    ResetCurrentVal of the fuser 950-880

    You should be good to go.

    Good luck

  3. #3
    Trusted Tech 50+ Posts Thayer's Avatar
    Join Date
    Dec 2017
    Location
    Burton, MI
    Posts
    56
    Rep Power
    6

    Re: Xerox Phaser 7100dn

    Quote Originally Posted by rockdude View Post
    Well like you said you are not a Xerox Tech, so I don't know if you will or wont follow what I am going to tell you.
    1. Go into Xerox diagnostics.

    Entering Service Diagnostics
    1. Press and hold Right Arrow.
    2. Press and hold Left Arrow.
    3. Release both buttons.
    4. Press Online within 3 seconds. The Diagnostics Preventive Diag screen appears.

    NEXT

    1. Press Right Arrow to display Preventive Diag DC122 SDHistory.
    2. Press Down Arrow and navigate to Preventive Diag DC135 HFSI.
    3. Press Right Arrow and navigate to DC135 HFSI ResetCurrentVal.
    4. Press Right Arrow and navigate to Reset Current Val 000-000 screen.

    NEXT

    ResetCurrentVal of the fuser 950-880

    You should be good to go.

    Good luck
    I will try this when I get back out to customer.
    Thank you.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here