Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Mar 2009
    Location
    lahore , punjab
    Posts
    214
    Rep Power
    0

    42-326 Error code on Versant 80

    Hi All,
    I am facing fault code 42-326 on versant 80 tried everything but had no success, is anyone facing this issue please see the detail below.

    The machine was working fine but after wakeup from power, saver mode it gives the error code 24-370, tracked through the Rap and replaced the MCU with PF board 24-370 fault code gone but at first startup 42-236 Error code. reset several times but no success.

    Action taken.

    1. Reload the new software
    2. Initial NVM and restore NVM
    3. Replaced Both LVPS
    4. Paper handling PWB
    5. AC/ DC Pwb.
    6. Ess Pwb, Halftone Pwb, and MCU and ESS interface PWB replaced.
    7. Replaced IBT Belt assy, IBT Belt
    8. IBT Male-female connector
    9 Replaced Fuser assy because another code shows in history 10-607/608
    10. Replaced Drum Units including developer housing.
    Note: steering came is not working in diagnostic mode, Ibt edge learn is also not working in diagnostic mode.
    checked all wairing all is ok,

    very interesting fault code which is never been faced like this....... Test case for all our xerox team.

    BR,
    Kt

  2. #2
    Senior Tech 250+ Posts jhalfhide's Avatar
    Join Date
    Apr 2015
    Posts
    379
    Rep Power
    19

    Re: 42-326 Error code on Versant 80

    Common enough code but always cured it by either cleaning the IBT patch or replacing the IBT.

    Is the belt actually driving as this would give the same code?

    Sent from my LYA-L09 using Tapatalk

  3. #3
    Technician
    Join Date
    Aug 2014
    Location
    Brisbane
    Posts
    45
    Rep Power
    16

    Re: 42-326 Error code on Versant 80

    If the NVM[741-700] (Belt Home Fail Too Long continuous occurrence count) is [3], clear to [0]

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Mar 2009
    Location
    lahore , punjab
    Posts
    214
    Rep Power
    0

    Re: 42-326 Error code on Versant 80

    Quote Originally Posted by Dech View Post
    If the NVM[741-700] (Belt Home Fail Too Long continuous occurrence count) is [3], clear to [0]

    Yes belt is driving but traveling to in board because steering cam is not working. Error code reset several times. Belt is already replaced with new one and working fine in other machine.

  5. #5
    Technician
    42-326 Error code on Versant 80


    Join Date
    Jun 2018
    Location
    Essex junction
    Posts
    22
    Rep Power
    8

    Re: 42-326 Error code on Versant 80

    try the front door interlock switch.

  6. #6
    Service Manager 1,000+ Posts
    42-326 Error code on Versant 80

    adriansto's Avatar
    Join Date
    Nov 2007
    Location
    Somewhere in Europe near Black Sea
    Posts
    1,957
    Rep Power
    56

    Re: 42-326 Error code on Versant 80

    Quote Originally Posted by ktxerox View Post
    Hi All,
    I am facing fault code 42-326 on versant 80 tried everything but had no success, is anyone facing this issue please see the detail below.
    Kt
    You saw the bulletin nr. 1396563 ?

  7. #7
    Senior Tech 100+ Posts
    Join Date
    Mar 2009
    Location
    lahore , punjab
    Posts
    214
    Rep Power
    0

    Re: 42-326 Error code on Versant 80

    Quote Originally Posted by magicaljake View Post
    try the front door interlock switch.
    Already replaced front interlock switch.

  8. #8
    Senior Tech 100+ Posts
    Join Date
    Mar 2009
    Location
    lahore , punjab
    Posts
    214
    Rep Power
    0

    Re: 42-326 Error code on Versant 80

    Quote Originally Posted by adriansto View Post
    You saw the bulletin nr. 1396563 ?
    Yes seen this tip but the belt was already under the curl plates

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here