Xerox Versant 80 error

[otphas]

Hello ,

we get error code 123-354 , we think that ESS board is damaged, is it have any chance to repair the board ?

[xcopytech]

Re: Xerox Versant 80 error

What is machine software version?

[otphas]

Re: Xerox Versant 80 error

Dont know , when we start the machine just 6 buttons on the display flashing 5 times and the machine restart .

[xcopytech]

Re: Xerox Versant 80 error

Check fuses on lvps

[otphas]

Re: Xerox Versant 80 error

Fuses are ok.

[xcopytech]

Re: Xerox Versant 80 error

Have you checked both lvps

[otphas]

Re: Xerox Versant 80 error

only 1

[xcopytech]

Re: Xerox Versant 80 error

Check fuses on both lvps

[azehnali]

Re: Xerox Versant 80 error

how did this problem happe?

[otphas]

Re: Xerox Versant 80 error

The customer connect the cable from display reversed in the machine.

[azehnali]

Re: Xerox Versant 80 error

then change the ees board

[otphas]

Re: Xerox Versant 80 error

Any chance to fix the board?

[xcopytech]

Re: Xerox Versant 80 error

You first can check leds on ess pwb.

[WIWA]

Re: Xerox Versant 80 error

Hello ,

we get error code 123-354 , we think that ESS board is damaged, is it have any chance to repair the board ?

Fault means Panel System Fail, Check for 24VDC source on both places panel and ESS check for those surface mount fuses vin and vout if you are soldered skilled take out from an old scrab board same value fuse and replace it .


Hope this helps,

Wiwa 72 , Gonzos build V1.0

[Andru]

I have the same problem. How did you solve yours?