PrintWhisperer
Trusted Tech
Last Activity: 3 days ago
Joined: 02-07-2018
Location: Wild West
-
It occurs to me that if you can get to Maintenance Mode U265 you could set the code to 1 for Kyocera and get the equivalent model number. Then load Kyocera... -
Well congratulations, I'm stumped. The device simply stops before issuing the SMB_Create_Request and there is no indication of why in the trace that...Leave a comment:
-
System Menu->Send Functions->File Name Entry would be the usual place but I'm still not sure what (US) model you are on, so you'll need to find...Leave a comment:
-
Good find.
If you replace the TX belt and it's fixed the assumption is that it's the TX belt circuitry but the Image Drive PWB could be flaky...Leave a comment:
-
If you can pick up an IP address, you can browse the event log by entering IPADDRESS/eventlog in your browser. Look for other EEPROM failure codes....Leave a comment:
-
I finally got a chance to look over your Wireshark, and it looks like a Test Connection and not an actual file transfer attempt. Packet 61 has the Server...Leave a comment:
-
Its DFS driver (distributed file system). A standard SMB response code for not having dfs enabled. It should be built-in on the Kyocera, but may be optional...Leave a comment:
-
Your Domain Name field has an IP address in it (BAD) and you have no DNS entry.
The system will prepend what's is the User field with what's in...Leave a comment:
-
If you have no domain then you are authenticating against the local user list in the Synology NAS where the share is located. So the NAS hostname would...Leave a comment:
-
No you cannot use public DNS to resolve internal hosts and shares.
Your router @172.18.4.1 should be used, or the DC if you have one. Place Domain...Leave a comment:
-
Title says 1105 but post says 1102 so which is it? 1105 says SMB not enabled so did ya do that? Enable SMB
1102 failure to connect to host...Leave a comment:
No activity results to display
Leave a comment: