4Toon
4Toon
Trusted Tech
Last Activity: 3 minutes ago
Joined: 03-09-2023
Location: Small Town, Wi
-
newer models it should just work. What is your issues?... -
On the PC-416, you can use the black tire (A64J564201) for everything in the i-series as well. I do this in schools or high-volume offices where the copier... -
A64J564101 feed AA2J560000 sep, and just the generic A00J563600 is way better from what I have seen. -
Hello,
which KATUN rollers you use for new KM-machines (i-series)?
best regards,
Ro -
Try these: Utility à Printer settings à basic settings à Image quality settings à Photo/DTP, and also when you printing from your driver, go to quality...Leave a comment:
-
Any way we can get a sample of the image quality issue?...Leave a comment:
-
New fuser needs FW: G00-N4 or higher, and for a c250i Engine DipSw 12 and 40 need to be set to ON and SW 54 to OFF. The plate should definitely be in...Leave a comment:
-
154 to 40 and 188 to 80 will help if you want darker reds need fw: RB or higher.. The only life issues we see are fusers not making life. Belts usually...Leave a comment:
-
SSD storage or CPU boardLeave a comment:
-
Yeah, I saw that bulletin too and looked at the reg unit and thought the same thing as you, that it was BS....Leave a comment:
-
We are having the same issue, so they are going to version 24. You have had no more issues since upgrading still?...Leave a comment:
-
This jam changed to a 30-03 jam. It seems related to a warped registration unit, dirty clutches, and, in one recent case, a severely bound-up registration...Leave a comment:
-
20-21 PC-416 intermittent
We have several relatively new MFPs, with print counts ranging from 40,000 to 200,000 over the past four months, experiencing intermittent 20-21 misfeed...
No activity results to display
Leave a comment: