AlaskaCopyTech
AlaskaCopyTech
Technician
Last Activity: 3 days ago
Joined: 01-06-2024
Location: Kenai
-
I have had text be pretty dark before running a gradation in service mode. Also should check your toner density settings and TCR - dark text can be the... -
Sounds like the machine never had a gradation and image stabilization done on install....Leave a comment:
-
Yeah those are special errors. Tap it and you will get the error. Consult the service manual for further detail. I believe these are called Print/IR ...Leave a comment:
-
Questions:
1. On basic or Classic?
2. On the home screen or address on the scan screen?...Leave a comment:
-
Just going to put it out there that you could try increasing the fuser temp to see if that helps the issue while the other fuser is enroute....Leave a comment:
-
1. Try re-flashing firmware.
2. Try flashing the boot up tool firmwareLeave a comment:
-
Yeah, this is a default driver config and firmware issue. Stapling on the right is the default option for when finishing is turned. Make sure the hole-punch...Leave a comment:
-
A customer I knew of had the exact same thing happen with a 4000p. Internal IT solved the issue. I recall it being something strange with the drivers...Leave a comment:
-
I didn't know such an "All Solutions guide" existed. How far back do these go? Is there one of these on the 3 series?...Leave a comment:
-
Yeah can confirm it's on the website. Guess this is what they working on when they finished GG3-RE. It's interesting it based on RF as G00-RF still isn't...Leave a comment:
-
Thank you copyman...Leave a comment:
-
Need Manuals
Hello all,
FS-542's and their punch kits have hit the US. Does anyone have a service guide that includes these or a parts guide? From the US one...
No activity results to display
Leave a comment: