Allante666
Junior Member
Last Activity: 1 week ago
Joined: 10-28-2024
Location: Lincoln
-
Well I give up with this! So I put a complete new HVPS board in. Still blue tint on backgrounds. So going by what Crowfeather said, I swapped over the... -
Hi. So Im thinking along the same lines. I think, like you, that the fact its fine in mono rules out the actual transfer parts i.e. the ITB and onwards....Leave a comment:
-
Also, is there any way of checking the developer unit? Just spoke to a local tech who says it sounds liek the charge wire/roller. I can get one but dont...Leave a comment:
-
Yes sorry I should have made that clearer, I emptied and cleaned the whole blade assembly, the blade, the hopper, the screw....Leave a comment:
-
Cleaned the wiper blade but has made no difference unfortunately, all colour prints still have a light blue caste....Leave a comment:
-
I already tried swapping the drum around but it still stayed the same colour background.
Also, it doesnt do it when it prints in black/white if...Leave a comment:
-
I havent checked that but if it was the cleaning blade then surely it would do it with all colours not just the cyan?...Leave a comment:
No activity results to display
Leave a comment: