Guys, Gals,
I have a Sharp AR-M355N copies with the AR-FX12 fax expansion unit. In the past, I have been able to access the web interface,...
13 results in 0.0226 seconds.
-
sharp ARM355N and reset
I just bought an old Sharp AR-M355N Gray scale Copier but I need to connect it to a network, I cannot access the network settings, because the operator... -
monocomponent toner or separate better
Got to thinking is separate developer better than monocomponant toner/developer. Always thought canon was nice b/c you don't have to change developers... -
Oki B8300 H4 Error
Can anyone tell me how to reset a fuser error on this printer? It's an Oki B8300 printer, but it's a sharp box. Not sure how to get into the service mode... -
Sharp AR-M355N
Have an issue that's got me baffled. The Drum/Processing Unit - as it turns, makes a clicking noise. I have updated the Firm, Changed out the Precessing... -
Sharp AR-M355N PCU Board replaced Firmware Update NEEDED
I have a Sharp AR-M355N which was suffering from not properly booting up at times. It would just sit there with the blue sharp screen on the display.... -
Sharp AR-M355N error code F2-00
What is error code F2-00
I replaced the toner car and cleaned out tray #1. And then the code came up.
when i print from the computer... -
Im3511 dspf 9290
Hi All,
I'm having a few problems with the doc feeder on the im3511 machines,
if you place a original in the feeder the original is... -
Sharp AR-M355N
Hi, Have one of these ... it has the scan function and a serial #, don't have the software to talk to it .. I've been told that there is another way to... -
AR-M355N feeds then cycles/ eventually misfeeds
I am working on a Sharp AR-M355n that the ADF misffeds. Rebuilt the feed with feed shaft, 1-way feed clutch, reg. mag. clutch, ( Feed shaft mag. clutch... -
Sharp Ar-M355N Deleting Profile
I am having a problem deleting profiles which are no longer used for our AR-M355N device. Does anyone know how this can be done?
Thanks,... -
Sharp AR-M355N AINPD_S Jam Codes
Hello Everyone,
I a AR-M355N equiped with an AR-DU4 Duplex module and an AR-FN6 Finisher. Intermittently, the machine will jam with a AINPD_S... -
AR-M355N reboot, lockup & blue screen?
Hi all, 1st post and it's a doozie! Sorry in advance for the L-O-N-G post!
I have a Sharp AR-M355N that has been giving me problems for over...
