Visitor Messages - Copytechnet.com

blackcat4866

Master Of The Obvious

Site Contributor
10,000+ Posts

Join Date: Jul 2007

Posts: 23009
#1

01-23-2010, 03:34 AM

I've got it put together, a fairly durable repair. When the customer was removing an ADF jam they sheared off the swivel pin for the original gate. They also sheared off the pin on the claw that lifts the pickup roller when the drive reverses.

I drilled a #63 hole in each location, and superglued in a length of SPC (small paper clip). It seems to be as durable as new parts.

I wonder if this DF isn't the same as some other HP MFP that does have a manual. It looks a lot like the HP LJ M3035X MFP. If my repair doesn't hold up you'll be the second to know. =^..^=

If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.

blackcat: Master Of The Obvious =^..^=
Tags: None