Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Junior Member
    Join Date
    Jul 2017
    Posts
    3
    Rep Power
    0

    Question ImagePress 7000VP error code 000015-0110-05

    Getting an error code 000015-0110-05 when booting up the machine. To make a long story short. Booting up the machine and got an error that one of the doors or levers weren't latch. Machine pointed to the primary fuser. Unlatched, pulled out and relatched. Now the machine boots up with the above error code. When the fuser is disengaged, the machine boots up to the point of a latch needs closed. Does anyone know if it is a fuser or sensor issue. Can someone tell me what this code is pointing to and more importantly how to fix it?


  2. #2
    Service Manager 10,000+ Posts
    ImagePress 7000VP error code 000015-0110-05

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,717
    Rep Power
    224

    Re: ImagePress 7000VP error code 000015-0110-05

    Quote Originally Posted by Lindac View Post
    Getting an error code 000015-0110-05 when booting up the machine. To make a long story short. Booting up the machine and got an error that one of the doors or levers weren't latch. Machine pointed to the primary fuser. Unlatched, pulled out and relatched. Now the machine boots up with the above error code. When the fuser is disengaged, the machine boots up to the point of a latch needs closed. Does anyone know if it is a fuser or sensor issue. Can someone tell me what this code is pointing to and more importantly how to fix it?



    E015 = Error in feed related roller position control
    0x10 Error: flapper position control

    The change of the position control sensor cannot be detected even when a specified period elapsed after the
    start of motor driving.
    1. Check if the connector at fixing flapper motor (M309) and delivery reverse flapper motor (M319) is disconnected/ not securely inserted -> disconnect and then connect the
    connector
    2. Replace the fixing flapper motor and delivery reverse flapper motor
    x=
    1: Fixing path (tandem/bypass)
    2: Delivery reverse flapper

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Technician
    Join Date
    Aug 2018
    Location
    NSW
    Posts
    47
    Rep Power
    1

    Re: ImagePress 7000VP error code 000015-0110-05

    Quote Originally Posted by Lindac View Post
    Getting an error code 000015-0110-05 when booting up the machine. To make a long story short. Booting up the machine and got an error that one of the doors or levers weren't latch. Machine pointed to the primary fuser. Unlatched, pulled out and relatched. Now the machine boots up with the above error code. When the fuser is disengaged, the machine boots up to the point of a latch needs closed. Does anyone know if it is a fuser or sensor issue. Can someone tell me what this code is pointing to and more importantly how to fix it?
    Please Help!!! How did you get rid of this error. I'm having the same issue...Please Help!!!


  4. #4
    Technician
    Join Date
    Aug 2018
    Location
    NSW
    Posts
    47
    Rep Power
    1

    Re: ImagePress 7000VP error code 000015-0110-05

    Quote Originally Posted by Kwaku01 View Post
    Please Help!!! How did you get rid of this error. I'm having the same issue...Please Help!!!
    Solved! Tnx


  5. #5
    Service Manager 10,000+ Posts
    ImagePress 7000VP error code 000015-0110-05

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,717
    Rep Power
    224

    Re: ImagePress 7000VP error code 000015-0110-05

    Quote Originally Posted by Kwaku01 View Post
    Solved! Tnx



    what steps did u follow

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #6
    Service Manager 2,500+ Posts
    ImagePress 7000VP error code 000015-0110-05

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    2,774
    Rep Power
    0

    Re: ImagePress 7000VP error code 000015-0110-05

    Quote Originally Posted by Kwaku01 View Post
    Please Help!!! How did you get rid of this error. I'm having the same issue...Please Help!!!
    fix was explained.


  7. #7
    Service Manager 10,000+ Posts
    ImagePress 7000VP error code 000015-0110-05

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,717
    Rep Power
    224

    Re: ImagePress 7000VP error code 000015-0110-05

    Quote Originally Posted by Phil B. View Post
    fix was explained.

    By who ?

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  8. #8
    Technician
    Join Date
    Aug 2018
    Location
    NSW
    Posts
    47
    Rep Power
    1

    Re: ImagePress 7000VP error code 000015-0110-05

    Quote Originally Posted by teckat View Post



    what steps did u follow
    Followed step 1 and it worked. Tnx
    "1. Check if the connector at fixing flapper motor (M309) and delivery reverse flapper motor (M319) is disconnected/ not securely inserted -> disconnect and then connect the
    connector"


  9. #9
    Service Manager 2,500+ Posts
    ImagePress 7000VP error code 000015-0110-05

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    2,774
    Rep Power
    0

    Re: ImagePress 7000VP error code 000015-0110-05

    Quote Originally Posted by teckat View Post
    By who ?

    By you Sir.



    Rep Power223
    Re: ImagePress 7000VP error code 000015-0110-05

    Originally Posted by Lindac
    Getting an error code 000015-0110-05 when booting up the machine. To make a long story short. Booting up the machine and got an error that one of the doors or levers weren't latch. Machine pointed to the primary fuser. Unlatched, pulled out and relatched. Now the machine boots up with the above error code. When the fuser is disengaged, the machine boots up to the point of a latch needs closed. Does anyone know if it is a fuser or sensor issue. Can someone tell me what this code is pointing to and more importantly how to fix it?






    E015 = Error in feed related roller position control
    0x10 Error: flapper position control

    The change of the position control sensor cannot be detected even when a specified period elapsed after the
    start of motor driving.
    1. Check if the connector at fixing flapper motor (M309) and delivery reverse flapper motor (M319) is disconnected/ not securely inserted -> disconnect and then connect the
    connector
    2. Replace the fixing flapper motor and delivery reverse flapper motor
    x=
    1: Fixing path (tandem/bypass)
    2: Delivery reverse flapper


    and the OP said he tried your suggestions and it is now operational. Good Job!


  10. #10
    Service Manager 10,000+ Posts
    ImagePress 7000VP error code 000015-0110-05

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,717
    Rep Power
    224

    Re: ImagePress 7000VP error code 000015-0110-05

    Quote Originally Posted by Phil B. View Post
    By you Sir.



    Rep Power223
    Re: ImagePress 7000VP error code 000015-0110-05

    Originally Posted by Lindac
    Getting an error code 000015-0110-05 when booting up the machine. To make a long story short. Booting up the machine and got an error that one of the doors or levers weren't latch. Machine pointed to the primary fuser. Unlatched, pulled out and relatched. Now the machine boots up with the above error code. When the fuser is disengaged, the machine boots up to the point of a latch needs closed. Does anyone know if it is a fuser or sensor issue. Can someone tell me what this code is pointing to and more importantly how to fix it?






    E015 = Error in feed related roller position control
    0x10 Error: flapper position control

    The change of the position control sensor cannot be detected even when a specified period elapsed after the
    start of motor driving.
    1. Check if the connector at fixing flapper motor (M309) and delivery reverse flapper motor (M319) is disconnected/ not securely inserted -> disconnect and then connect the
    connector
    2. Replace the fixing flapper motor and delivery reverse flapper motor
    x=
    1: Fixing path (tandem/bypass)
    2: Delivery reverse flapper


    and the OP said he tried your suggestions and it is now operational. Good Job!


    Getting Old 😱

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here