iR5570 - waste toner container

[Guest]

is there any other procedure after removing the waste toner? my ir5570 get the waste toner full, after i remove the waste toner, the sign wont disappear. unlike ir8500, after remove the waste toner, should enter the svce mode, but i couldn't find any function to clear in service mode on my ir5570.

[D_L_P]

Empty it and clear the counter in
Copier-> Counter-> Misc-> Waste-TNR

[bolabali]

I got same thing with iR3300
somebody told me Copier-> Counter-> Clear->MMI OK
nothing changes..

[teckat]

I got same thing with iR3300
somebody told me Copier-> Counter-> Clear->MMI OK
nothing changes..

U don't clear MMI -for waste toner message on iR3300 SERIES
Waste toner case full detection mechanism
Remove the waste toner case, empty out & clean or replace case >
>then turn off and then on the main power switch.

Clean both inside and outside of area A of the waste toner case
with alcohol.
waste.JPG

[teckat]

is there any other procedure after removing the waste toner? my ir5570 get the waste toner full, after i remove the waste toner, the sign wont disappear. unlike ir8500, after remove the waste toner, should enter the svce mode, but i couldn't find any function to clear in service mode on my ir5570.

iR5570-6570
SERVICE MODE:
COPIER>COUNTER>MISC>WASTE-TNR
waste toner counter; when its reading reaches '250,000', the machine will issue an alarm on the User screen.
Dispose of the waste toner, and reset the error code.
MEMO:
The waste toner bottle can hold toner good for a maximum of 500,000 prints. The machine will indicate a waste toner bottle full alarm when the counter reading reaches '250,000'.

[bolabali]

bingo!
two thumbs up teckat
thanks alot.

[teckat]

Thumbs up.jpg

[bolabali]

2Thumbs up.jpg

[JPP Océ]

and dont forget if the spring inside the tube is stuck you going to have a error code E 13

[Dedy.P]

thanks for the info Mr.teckat ...