It makes a loud gear or drive belt skipping noise when it feeds from the right deck over to the left. All the clutches have holders and i have swopped clutches arround as they are the same ones. But still noisey.
Any ideas?
Any ideas?
-
-
There are many posts on this problem. The small clips on the frame of the feed assy break off causing the feed assy to lift up, causing gear mesh noise. If you look at the left feed pulley assy, rear side you will see the broken clip. We drill a hole from bottom and secure assy to plastic frame with a small countersunk screw.My mission here on Earth is to help all you Dum-Dums! -
Ditto.If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
Comment