[CQ] Kyocera FS - C5300 DN color position shift and failure to adjust the colour regist

[kibbs]

Dear all, Today i am facing the color registation problem in Kyocera Fs-C5300dn.. i get the bulletin from kyocera site.. SB Number: SB 2HN-014. I am follow the instruction and also the problem is same.. i don't know what to do.. for view i attached the sample status page and color registration with this page..please give the solution for me...

i tried prescribe command also
!K! KCFG"SVEG",208, 10;EXIT
but not use

thanks & Regards

kibbs

[kibbs]

Re: Kyocera FS - C5300 DN color position shift and failure to adjust the colour regis

Dear all, Today i am facing the color registation problem in Kyocera Fs-C5300dn.. i get the bulletin from kyocera site.. SB Number: SB 2HN-014. I am follow the instruction and also the problem is same.. i don't know what to do.. for view i attached the sample status page and color registration with this page..please give the solution for me...

i tried prescribe command also
!K! KCFG"SVEG",208, 10;EXIT
but not use

thanks & Regards

kibbs

Today i am replace the Transfer and also problem remain same... any help..???? new firmware also tried.

[stevena86]

Re: Kyocera FS - C5300 DN color position shift and failure to adjust the colour regis

It appears it's just the black that is off. Is the black drum/developer seated correctly?

Do the color calibrations and see if you can calibrate the machine.

[rashid120]

Re: Kyocera FS - C5300 DN color position shift and failure to adjust the colour regis

Dear all, Today i am facing the color registation problem in Kyocera Fs-C5300dn.. i get the bulletin from kyocera site.. SB Number: SB 2HN-014. I am follow the instruction and also the problem is same.. i don't know what to do.. for view i attached the sample status page and color registration with this page..please give the solution for me...

i tried prescribe command also
!K! KCFG"SVEG",208, 10;EXIT
but not use

thanks & Regards

kibbs

My friend,

please try this firmware and let me know.
Firmware upgrade (Main v.007.008 and Engine v.011.001)

Registration problem was solved through this firmware. Gud luck

Thanks and Regards.

Rashid iqbal.

[kibbs]

Re: Kyocera FS - C5300 DN color position shift and failure to adjust the colour regis

It appears it's just the black that is off. Is the black drum/developer seated correctly?

Do the color calibrations and see if you can calibrate the machine.

i noted its seated correctly in the machine.. i do color calibration problem looks same..

[Zackuth]

Re: Kyocera FS - C5300 DN color position shift and failure to adjust the colour regis

You will have to do a color registration several times to bring this back into alignment. I had a similar machine that was as out of registration like your machine that it took 6 times before it was correct.

[Tonerkiller]

Re: Kyocera FS - C5300 DN color position shift and failure to adjust the colour regis

I had one like that. I did the reg adj to the max about 20 times to get it right

[jonbonse]

Re: Kyocera FS - C5300 DN color position shift and failure to adjust the colour regis

Hi all

i have this in a FS-C5350 and have been told there's special firmware to fix...

Has anyone got it?

[Tricky]

Re: Kyocera FS - C5300 DN color position shift and failure to adjust the colour regis

Check your pms

[jonbonse]

Re: Kyocera FS - C5300 DN color position shift and failure to adjust the colour regis

Check your pms

Hi

Do you have the bulletin on this?

[Has Been]

Re: Kyocera FS - C5300 DN color position shift and failure to adjust the colour regis

Hi

Do you have the bulletin on this?

Call the hotline and have them remote in and reset the printer.