Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1

    Question Ricoh 1180L fuser error.

    This very new Ricoh 1180L came up with "printer Error--- Fusser Temp" . I have gone through the service manual and cannot find how to reset the fusser section. I have been told the enter service code in the manual is wrong too. Has anyone had experience with this? Thanks for any assistance you can give me!

  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Jun 2008
    Rep Power
    Set soft Switch 1(SOS1), bit 8 value to 1 (service manual p92 +93):
    1. Press "arrow down" --> press * --> press #
    2. Select Soft switch 1 with up/down and press OK
    3. Change the value of bit 8 to 1 by pressing 1 and OK to confirm.
    Erase Printer error (Administrator function, Initializing and erasing memory, service manual p104)

    1. Press "arrow down" --> press #
    2. With arrow up/down select "T", then press OK
    3. Switch ON/OFF
    After rebooting change back the SOS1

  3. #3

    Ricoh 1180L

    Thanks for responding. Unfortunately my manual does not have page number that match yours. My service manual is sectioned out, and then has numbers like "4-12". Any chance of getting those pages sent to me?

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=

IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here