Ricoh 1180L fuser error.

[Guest]

This very new Ricoh 1180L came up with "printer Error--- Fusser Temp" . I have gone through the service manual and cannot find how to reset the fusser section. I have been told the enter service code in the manual is wrong too. Has anyone had experience with this? Thanks for any assistance you can give me!

[limo]

Set soft Switch 1(SOS1), bit 8 value to 1 (service manual p92 +93):
1. Press "arrow down" --> press * --> press #
2. Select Soft switch 1 with up/down and press OK
3. Change the value of bit 8 to 1 by pressing 1 and OK to confirm.
Erase Printer error (Administrator function, Initializing and erasing memory, service manual p104)
1. Press "arrow down" --> press #
2. With arrow up/down select "T", then press OK
3. Switch ON/OFF
After rebooting change back the SOS1

[portofsu]

Ricoh 1180L

Thanks for responding. Unfortunately my manual does not have page number that match yours. My service manual is sectioned out, and then has numbers like "4-12". Any chance of getting those pages sent to me?