Quote Originally Posted by El Papa View Post
Got the same issue. One of our engineers attended site with the device stalled in the middle of a print job. Removed HDD and E7-03 error.

He requested a HDD (1TB SATA) and I returned to fit.

Replaced HDD and screen is dead with blinking LED on op panel. Checked controller and all four LEDs are illuminated.

Installed old HDD to see if issue with new HDD and issue still the same. All fans are running.

This is the only MFD of this type we have in Field and up till now it's caused no issue.

Any info on fix would be appreciated or a start point. Does this MFD boot via the HDD or are we looking at a faulty DIMM?

Issue was with 1TB HDD.