Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    The Wolf 1,000+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Rep Power

    "L3-00, oh no!" Mojos Sharp Fix #2 402SC

    After several of these codes appearing on the Frontier SC machine, I noticed the spring (red) that applies tension to the CCD drive belt does not have enough tension on it, causing L3-00 codes. A simple washer (green) under the anchor screw shown in the picture above will alleviate this code permanently. With the SC model, the optic cavity can be accessed from the top, unlike the previous 401 machines.

    Failing to plan is planning to fail!!!

  2. #2
    Master Of The Obvious 10,000+ Posts
    "L3-00, oh no!"  Mojos Sharp Fix #2 402SC

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Lapeer, Michigan
    Rep Power

    Re: "L3-00, oh no!" Mojos Sharp Fix #2 402SC

    Good catch! Thanks for sharing. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Get the Android App
click or scan for the Copytechnet Mobile App


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here