Toshiba E-Studio 3511 / 4511 firmware

[optik]

of course i need help... and i really sleep next to that machine. I call a friend who works on a Toshiba Dealer... and he said exactly waht i try to do after service manual and your intructions... and nothing. If you have friends in Romania, please give me a phone number or a contact. I will pay if is need. I am in the middle of the country... Fagaras, near Brasov. Thanks again... if i can help you whit something, please contact me. Neighbour ;-)

[tsbservice]

I just send an email to my friend in Bucharest, he is very good man and engineer and may want to help you, just be patient, I'm out of ideas right now and will come to you as soon as can give other resolutions.

[Sbarro]

Its not a bigger HDD. I did succesfully replace (E-Studio 3511) old Maxtor with new 160GB Samsung and it works one year since then. Last post of Mr Spock is very important for you.
I did it many times wrong. In old E-Bridge 1 series machine you have to download OS first, but then is one thing which is unclear in manual. When you put rest of the files on the pendrive there is no mention if the OS file should be still there or not. I can't remember which way is proper but only one works. Try both.
And one more thing: DO NOT TURN IT OFF after OS update. Just remove your pen, fill it rest of the files then put it back in machne and press START to download rest of the firmware. In the second stage you can see all the firmware marked.
It MUST work.

[tsbservice]

Hi optik, check your private messages, I just send you my friend's email and he has recovery jig, let us know how it goes.

[optik]

Back... With good news... i solve the problem... Like Sbarro said... i didn`t turn of the machine after OS was upgraded. Thanks all of you for your help.

For tsbservice: your friend didn`t answer me, yet. But thanks for help.

Message me if you need help... thanks again all of you.

[Oldtimer]

I'm new to this forum and posting procedures in general, so please forgive my etiquette ignorance.

I'm having a similar problem with a estudio4511 as and have received the firmware update from Baphomet. As background info, I just installed a new drive. Performed the 03 3 and then the 08 690 and the copier works fine, but will not network and will not perform any of the user function print commands.

I've tried installing the firmware update via thumb drive with Fat Formatting, according the the instructions in this forum and per the manual, and the screen is stuck in the update mode and reads "Please wait...now Initialization". I can't seem to get past this.

I could use any help.

Oldtimer

[Baphomet]

You are not waiting long enough. It takes between 15 and 20 minutes for the display to change to your options.

[quazar]

Can anyone help regarding f100 error code of 3511. As I read the previous messages its HDD error. Ive bought and HDD. I think i need firmware to install it. There is some point that I did not understand. Existing HDD is 80GB Maxtor and FAT16. As I know FAT16 does not support more than 32GB so how it works then.

Which File system do I have to use FAT16-FAT32?

Hope to hear from somebady soon.

Regards

[Webby448]

Hi, I have a 3511 which is having some HDD problems (105 error). I did a 694 scan on it and it came up with errors (ErrNo[3(0x3)] SectAdrs[112729856(0x6b81f00].

It seems that the HDD needs replacing. I have another HDD to put in, but I don't have the firmware to upgrade when I put it in. Is anyone able to help me locate some firmware?

Thanks in advance.

[ivovb]

	Quote:			Originally Posted by quazar
	Can anyone help regarding f100 error code of 3511. As I read the previous messages its HDD error. Ive bought and HDD. I think i need firmware to install it. There is some point that I did not understand. Existing HDD is 80GB Maxtor and FAT16. As I know FAT16 does not support more than 32GB so how it works then. Which File system do I have to use FAT16-FAT32? Hope to hear from somebady soon. Regards

You need clear, not partitioned HDD! Machines makes partitions during HDD replacement procedure. Check it in SH.

BR