338 results in 0.1107 seconds.
-
5052ci not recognizing toner cartridge
I have had a few of theses series do this to me! Says not recognizing toner or toner installed incorrectly! Found a Bulletin and seems to fix the issue.... -
KM C70hc with Creo ic-307
I have a KM C70hc with a Creo ic-307.
Cannot get patches to load.
Please can someone tell me how to download patches just in case i'm doing... -
KM 423 Jam 30-01
I have a KM 423 (150,000 on the clock) with an intermittent jamming problem (every 50 pages or so)
The jam is J 30-01 which points to the image... -
MPC5502
I have an MPC5502 with SC670 and SC672, we can't get into service modes on the machines or run diagnostics, has anyone one of you ever had this problem... -
Xerox 7345 Need to reset color calibration
Hello, I am working on a 7345 and I may have messed things up. The Cyan and Magenta are very light and so I attempeted to do a print calibration using... -
Kyocera 4050 windows 7 print and scan problem
Hello Guys,
I have a kyocera km-4050 model photocopy. Windows XP is successful in the printing and scanning.
But it does not print... -
c4035e - hdd format - won't print now - control panel buttons dead (display good)
Rescheduled the delivery. Don't know what happened but yesterday machine working perfect - firmware sys 2JD_3000.003.005 engine 2JD_1000.009.001 - did... -
Is it ok to install US version firmware on an Australian copier?
Recently I bought a 2ndhand konica minolta bizhub 250 b/w photocopier and it works fine as a photocopier. But, I'd like to connect it to my LAN and use...Last edited by Guest; 06-04-2013, 02:09 AM. -
MP 2510 message load A5 size paper
Hi
one of my MP 2510 once we feed paper in LEF from DF and paper in tray one or two in
same LEF while copying message in display showing... -
HP CP3525 Colour alignment out
HI, A client's HP CP3525 colours are all out of alignment. The Black is fine. Is there a way to re-align the colours? Cannot find anything in the service... -
AR-M277 Original Size Detection Issue - Document Feeder
Have an AR-M277 which always detects EXTRA paper in document feeder. Automatic adjustment fails on WLT. When watching width sensor values it jumps from... -
MX2300 + FNX1 woes
Hi there,
We have some headaches with a combination of MX2300 and FNX1. The papers come out unharmed and get pulled back properly, but atleast... -
C451 & C550 Image Problems
I have had this problem on the C550 for years, The Transfer belt cleaning roller drive gears on the main body always wear out and start to jump out of... -
ColorQube 93XX 92XX Printhead issues
Have had two machines where after replacing an upper printhead the IME Board blows. Anyone else see this? -
C451 won't power after C3B04 Error
I have a unit that was connected to my clients 220 outlet that was wired incorrectly, or just had a short. The unit was on for a short time and had a...
