If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
how do you carry a 3000kg of photocopy machine up the stairs?
Re: how do you carry a 3000kg of photocopy machine up the stairs?
I would be in trouble. I don't have 43 friends, and most of the remaining ones can't lift their own share anymore. Additionally you might be hard pressed to find 43 hand holds let alone 86 (for two hands). =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
Re: how do you carry a 3000kg of photocopy machine up the stairs?
on average the guys lifting it would weigh in at 3.6 metric tons. It needs to be at least 15 meters counting all the sides.
So say 6 meters long and 1.5 wide.
That gives each guy only 350mm of space.
Turning in a stair case could be a little difficult.
Someone is going to die put you worst friend at the back.
Re: how do you carry a 3000kg of photocopy machine up the stairs?
If there are acceptable openings on the outside of that building, I'd suggest using a crane. I used the crane on the back of my M816 for all sorts of stuff back in the day, it's not that hard.
Re: how do you carry a 3000kg of photocopy machine up the stairs?
If there is no turning on staircase make a platform to counterfit the staircase and lift it the bugger the good old way by levering it bit by bit (or using jacks) until you reach the top level and then roll it across the platform. It will take forever but can be done.
Picture or projection of destination might be usefull.
.OK Google! ... will I need Berrocca this morning?
Re: how do you carry a 3000kg of photocopy machine up the stairs?
Originally posted by aviso66
Lets say if you had a situation where there is no lift. Only to carry up to 2nd floor a 3000kg photocopy machine.
How would you do that?
One piece at a time.
True story: I actually did gut a brand new KMBS 951 pro. Just so we could carry it up to the 2nd floor. Then gut a Large Ricoh so it could be carried down.
Comment