MPCxx03 Metis Squeaking PCDU

[copier tech]

Hi all,

seen a few now one of the PCDU send out a loud squeak, mainly on black.
Running output checks cheating the doors I pull each unit & squeak stops so can narrow down 100% which one of the YMCK PCDU squeaking. Rather than ordering an expensive unit can any guys narrow down a part that causes this? Tried a few drops of oil on bushings but obvs need to apply in tiny ammounts to not soil OPC.

[Lagonda]

Re: MPCxx03 Metis Squeaking PCDU

You will be better off posting this in the Ricoh thread rather then in Rants 'n Raves. Unless of course you can find away of blaming D. Trump for your troubles.

But in the mean time how old is the PCU and have you tried some lube / setting powder on the drum?

[copier tech]

Re: MPCxx03 Metis Squeaking PCDU

You will be better off posting this in the Ricoh thread rather then in Rants 'n Raves. Unless of course you can find away of blaming D. Trump for your troubles.

But in the mean time how old is the PCU and have you tried some lube / setting powder on the drum?

Ah yes didnt notice that! Cant blame trump for this one ha ha