Without mentioning anyone in particular, it does seem to me that a certain poster(s) here must be taking the piss out of us. I can't believe people who ask the kinds of questions that have popped up here can even use a keyboard to make the post.
-
I have not failed. I've just found 10,000 ways that won't work. ~Thomas Edison -
Re: Ridicule???
I think I know who you're talking about. Tell me, has he ever listened to anyone's advice? If not, why does he post questions? The answer is simple. He wants to get everyone upset. Solution: Ignore his posts. Do NOT reply. Eventually, after receiving no attention, he will go away. Either than that, someone should start a poll and see how many want him gone. The administrator can give him the "our members have spoken, so na na na na, hey, hey, hey,...your gone" speech and kick him off here.Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!". -
Re: Ridicule???
me too think i know eksaktly ...what you are talking....about...this is a reel paine....these mempers....whiz there...baad...posts...but dont wurrie brother...this will end fineallie....its like having the shits...it will end one day....
Hans“Sent from my Intel 80286 using MS-DOS 2.0”
Comment
-
Re: Ridicule???
There's a difference between stupid questions and idiots who ask one, make up their own answer, and then refuse to listen to experts advice. I don't have a problem with anyone else on the site, just him.Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".Comment
-
Re: Ridicule???
i find ignorant posts/replies amusing
check my sig for reference.Notatechie - "I am trying, but I don't know how to go into Service Mode. If I just go in and press *then 2, than 8, then * it does not do anything."
SCREWTAPE - "Try harder.."
Comment
-
Re: Ridicule???
Hans,
I was confused at first, but I know your English is on par or better than mine. It took me a second. I get the joke. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: Ridicule???
I didn't get it until I read Blackcat's post. I don't have a problem with him. At least he's funny and he only wants stuff for free. I can understand that, don't we all? It's the moron that said he wanted to leave this site and then promptly posted a question, stated what he thought the answer was, and slammed everyone else's reply. That one has more than the normal couple of screws loose.Hans,
I was confused at first, but I know your English is on par or better than mine. It took me a second. I get the joke. =^..^=Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".Comment
-
Re: Ridicule???
I think they are pretty easy to spot! They start out saying "I am a tech", then the question is "Who has firmware?" or " How do I get in to tech rep mode?"
Comment
-
Re: Ridicule???
I have no idea who you are talking about but forums in a way do open themselves up for ridicule. An outsider reading Copytechnet where we talk about office laser printers might think "I can have some fun here" and start threads about why he thinks inkjets are far superior to lasers and the reason he refills his toner cartridges.Comment
-
Re: Ridicule???
I refill my inkjet cartridges with a mixture of melted crayons and vegetable oil. I then use the empty oil bottles to make large ink cartridges for my HP printer. I am paying .0000385 per page. Beat that dual component systems!! On my Canon, it get a colander from the kitchen and sift the waste toner out, mix it with pencil shavings, and dump it back in the DV unit. I have to set the charges considerably lower to prevent ignition of the shavings, and my fuser rolls seem to fail prematurely; but I'm only paying .000438 per page!!!!
i couldn't resist....Failing to plan is planning to fail!!!Comment
-
Re: Ridicule???
This post deserves a round of applause. I personally use olive oil and they have to be Crayolla brand crayons.I refill my inkjet cartridges with a mixture of melted crayons and vegetable oil. I then use the empty oil bottles to make large ink cartridges for my HP printer. I am paying .0000385 per page. Beat that dual component systems!! On my Canon, it get a colander from the kitchen and sift the waste toner out, mix it with pencil shavings, and dump it back in the DV unit. I have to set the charges considerably lower to prevent ignition of the shavings, and my fuser rolls seem to fail prematurely; but I'm only paying .000438 per page!!!!
i couldn't resist....I have not failed. I've just found 10,000 ways that won't work. ~Thomas EdisonComment
-
Re: Ridicule???
When I first read this person's request to delete his account, and the responses given to him, I decided to read his posts to find out what everyone was talking about. I read 15-20 of his posts and figured all this guy wants to do is argue with people. It wouldn't have mattered what was said, or how many facts were given, he was gong to argue against it. If he is gone we'll be better off.If at first you don't succeed, redefine successComment
-
Re: Ridicule???
I refill my inkjet cartridges with a mixture of melted crayons and vegetable oil. I then use the empty oil bottles to make large ink cartridges for my HP printer. I am paying .0000385 per page. Beat that dual component systems!! On my Canon, it get a colander from the kitchen and sift the waste toner out, mix it with pencil shavings, and dump it back in the DV unit. I have to set the charges considerably lower to prevent ignition of the shavings, and my fuser rolls seem to fail prematurely; but I'm only paying .000438 per page!!!!
i couldn't resist....
This way tooooo funny. I'm still laughing as I post this. This made today a great day. Thank you.
Comment
Comment