Technology

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • zaza
    MECANOGRAPHE

    1,000+ Posts
    • Mar 2008
    • 1095
    #1

    [Funny] Technology


    what do think about this technology ....
    BEST TECHNICIAN . NICE PEOPLE .
    Tags: cores, drums, installed, one, stalled, tech, technology, used drum, video
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22997
      #2
      Re: Technology

      Have you ever installed one of these re-coated drums? Typically my used drum cores look a lot worse than the ones in the videos. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • JR2ALTA
          Service Manager

          Site Contributor
          1,000+ Posts
          • Feb 2010
          • 2030
          #3
          Re: Technology

          Is it true that you can cover a nick with clear nail polish?

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22997
              #4
              Re: Technology

              Only 20 years ago on machines like the Mita DC-121, DC-122, DC-131, DC-133R that did not use a drum cleaning blade. They used a cleaning corona wire. There was no physical contact during the cleaning process, consequently no problem with that lump of nail polish. The waste toner was drawn back into the developing unit and recycled. No waste toner collected.

              If you try it on a machine with a drum cleaning blade it will leave a donut shape of waste toner around the nail polish lump, and eventually a streak when the drum blade wears in one area. I hated to lose that trick ... but it just doesn't work any more. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • Hansoon
                  Field Supervisor

                  Site Contributor
                  2,500+ Posts
                  • Sep 2007
                  • 3373
                  #5
                  Re: Technology

                  That's not Technology, that's "Crapology"

                  What a mess......

                  Hans
                  “Sent from my Intel 80286 using MS-DOS 2.0”

                    Comment

                    • zaza
                      MECANOGRAPHE

                      1,000+ Posts
                      • Mar 2008
                      • 1095
                      #6
                      Re: Technology

                      well by way ..it is a older technology ....since long time all technician use this technology to clear all stripe drum but now all is difference..can anyone explain to use ..by any video ...greeting
                      BEST TECHNICIAN . NICE PEOPLE .

                        Comment

                        • zaza
                          MECANOGRAPHE

                          1,000+ Posts
                          • Mar 2008
                          • 1095
                          #7
                          Re: Technology

                          other something ...if this technology useful in canon analog series like canon np1550..6220...6317...?
                          BEST TECHNICIAN . NICE PEOPLE .

                            Comment

                            • Akitu
                              Legendary Frost Spec Tech

                              Site Contributor
                              2,500+ Posts
                              • Oct 2010
                              • 2595
                              #8
                              Re: Technology

                              Originally posted by JR2ALTA
                              Is it true that you can cover a nick with clear nail polish?
                              Yes, as long as the coating is thin enough and properly applied so as not to interfere with cleaning, else you run the risk of having the cleaning blade catch the polish and shear off some more of the drum's surface.

                              Source: did it to a drum from an MP2400W Wide Format Ricoh printer the first time I changed the drum on that behemoth. Accidentally dropped it and was maybe 3 months into my career, on a secure location (hydro dam being constructed) approx. 1 hr from shop. The trailer happened to be full of a bunch of beautiful women, so naturally I assumed one of them might have some, and as luck had it I was correct.

                              Polish was applied and it left visible marks for the first 50 feet of paper or so, but after it had a chance to settle in properly you couldn't tell at all, and it still applied toner and cleared it off as though there was no damage in the first place.
                              Cthulhu for president! Why settle for the lesser evil?

                                Comment

                                Previous template Next
                                Working...