Solution to clean copier machine.

[blackcat4866]

Re: Solution to clean copier machine.

Does that mean that last January was not the first you have fallen off a ladder?

It wasn't my first fall from a ladder, but it was the first time I landed like that. The tuck and roll works much better. For the most part though, I only do each stupid thing once. =^..^=

[Zaxxon]

Re: Solution to clean copier machine.

Retr0Bright (or RetroBright) treated plastics re-yellowing even with minimal light exposure?

[allan]

Re: Solution to clean copier machine.

Retr0Bright (or RetroBright) treated plastics re-yellowing even with minimal light exposure?

Now i miss my Commadore 64

[Zaxxon]

Re: Solution to clean copier machine.

I got my 64 and vic 20 they are great fun still

[allan]

Re: Solution to clean copier machine.

I got my 64 and vic 20 they are great fun still

I wonder how repeatable they are. i can get broken ones.

[NeoMatrix]

Re: Solution to clean copier machine.

Now i miss my Commadore 64

Yep put a program cassette in (rolls of magnetic film y-gen) and go make a sandwich and a cup of coffee while it loads the computer program.

I like my old Z80 (Ziolog 80 2mhz CPU ) chip set. CP/M operating system. A lot faster load and run times than the commodore 64. I still have BASIC and Assembler programs laying around here from those old machines. I've thrown a lot of software out though.

[allan]

Re: Solution to clean copier machine.

I wonder how repeatable they are. i can get broken ones.

Yep put a program cassette in (rolls of magnetic film y-gen) and go make a sandwich and a cup of coffee while it loads the computer program.

I like my old Z80 (Ziolog 80 2mhz CPU ) chip set. CP/M operating system. A lot faster load and run times than the commodore 64. I still have BASIC and Assembler programs laying around here from those old machines. I've thrown a lot of software out though.

Sorry the spellcheck screwed with me. How easy do you think it would be to fix a broken commadore 64. I can get a couple of broken ones.

[prntrfxr]

Re: Solution to clean copier machine.

I'll confirm that. I was working with this smart gentleman that mixed up a concoction of bleach and ammonia, and provided it to me to use as a wax floor stripper. Like an idiot I went along with his plan. The fumes burned my lungs, and I couldn't breath very well for two weeks. The mixture was strong enough that it melted all the pattern off my brand new Converse All-Stars.

As a result of that event, I have a really bad physical reaction to anything that smells remotely like ammonia. =^..^=

Dish detergents have ammonia, so be careful.
Ammonia and bleach make a toxic gas. Very dangerous.

[Zaxxon]

Re: Solution to clean copier machine.

Sorry the spellcheck screwed with me. How easy do you think it would be to fix a broken commadore 64. I can get a couple of broken ones.

Repair guide here at Ray Carlsen

Ray Carlsen's Home Page

[leonardob]

Re: Solution to clean copier machine.

Hello guys, I had some machines MP C2551 with exterior covers yellow in some parts, In brazil this covers cost like 300,00 R$, something like 120 US$, i've heard about a solution that includes some hydrogen peroxide mixed with ammonia.anyone know about it?how amount I use of each one?.

thanks.

Hi ,

Hydrogene peroxide (in Portuguese Agua Oxigenada) and UV light .

The most economical is to go to the pharmacy and purchase Hydrogen Peroxide (5-6%) solution , spread on the cover , cover with a thin paper tisue (to keep it moistened) and put in the sun for 30-60 minutes. Wash with water ... Note the the cover will get yellow again in the future.

More expensive solution , Hair bleaching solution and a UV-A lamp ( The UV laugh must work on a frequency of 300-350 nanometers) .

or check the site : http://www.retr0bright.com

Good luck ,

Leonardo

[Tonerbomb]

Re: Solution to clean copier machine.

Yep put a program cassette in (rolls of magnetic film y-gen) and go make a sandwich and a cup of coffee while it loads the computer program.

I like my old Z80 (Ziolog 80 2mhz CPU ) chip set. CP/M operating system. A lot faster load and run times than the commodore 64. I still have BASIC and Assembler programs laying around here from those old machines. I've thrown a lot of software out though.

yep cut my teeth in school with assembler on an 8080A processor on a bread board trainer, Back in the day when a 10 meg hard drive was the size of a dishwasher.......................