White line on cyan print DC250 xerox

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bluwavejunk

    #1

    White line on cyan print DC250 xerox

    HI Can anyone help.
    I've got a white line whic appears only when printing anything in blue. Effects the cyan unit only. I think it's the cyan dev unit some crap or grit must have got in there.
    It's not the ROS unit/mirrors as I've clean it about 5 times. The white streakie line is still
    there it's about 145mm from the edge of the operators side SRA3 sheet.
    I was wondering if I should open the Cyan dev unit
Working...