HI Can anyone help.
I've got a white line whic appears only when printing anything in blue. Effects the cyan unit only. I think it's the cyan dev unit some crap or grit must have got in there.
It's not the ROS unit/mirrors as I've clean it about 5 times. The white streakie line is still
there it's about 145mm from the edge of the operators side SRA3 sheet.
I was wondering if I should open the Cyan dev unit
I've got a white line whic appears only when printing anything in blue. Effects the cyan unit only. I think it's the cyan dev unit some crap or grit must have got in there.
It's not the ROS unit/mirrors as I've clean it about 5 times. The white streakie line is still
there it's about 145mm from the edge of the operators side SRA3 sheet.
I was wondering if I should open the Cyan dev unit