km bizhub c450 Image unit chip install

[Guest]

I got 4 chips to replace on the imaging unit of Konica minolta bizhub c450.
I replace the cyan first, and no problem.
I go to the Black, but the chip that came is different than the one on the imaging unit. The seller says its for C351 and C450. But the black chip is different.
So maybe I have to order other chip. Some help here
Thanks

this is the image of what I got.

http://www.flickr.com/photos/62611116@N08/5691438431/in/photostream

[rosaro75]

if you need to reset the old chip pls send it to me and have to mention mc model 110v or 220v. send pm.

[blazebusiness]

I got 4 chips to replace on the imaging unit of Konica minolta bizhub c450.
I replace the cyan first, and no problem.
I go to the Black, but the chip that came is different than the one on the imaging unit. The seller says its for C351 and C450. But the black chip is different.
So maybe I have to order other chip. Some help here
Thanks

this is the image of what I got.
4chips-IU-KM-c450 | Flickr - Photo Sharing!

Take the front plastic cover off the black IU and you will see the chip (a small pcb ) that you need to replace. Unplug the connector and remove the old board. Put the new pcb in and connect the connector. If you need the black chip(pcb) ..... Copylite sells them cheap.

[suresh]

OK, thanks

I open the front plastic cover, taking the 5 screws out, and pulling the blue rod out so I could see the chip.
I replace the chip. reinstall the cover and slide the Imaging unit back.

And now this is the error on the screen:
"The wrong imaging unit is set.
Please install the correct Imaging Unit, and close all doors"

[blazebusiness]

Maybe you did get the wrong chip or a bad chip then....try ordering another from Copylite....never had a problem with their reset kits

[suresh]

try to register in copylite, but I'm not a reseller.
thanks anyway

[rosaro75]

for 110v machine and 220v machine the chip differs. so confirm it clearly. please ask the seller wheather it is for 110v or 220v.