Introduction from South Wales

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • boyrevel
    Junior Member
    • Dec 2009
    • 2

    #1

    Introduction from South Wales

    Hi

    I've been on here for almost two years - as a lurker! I thought I'd say a quick hello and thank you to all of you who have contributed, and continue to do so, to this amazing resource.

    I've been in the copier industry for 17 years, I started as a techie, moved into sales for a bit, then set up a dealership with a few other guys 6 years ago. In Septemeber last year I set up a Develop dealership on my own and myself and my girlfriend run things.

    Cheers!
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22996

    #2
    Re: Introduction from South Wales

    Congratulations on breaking out.

    Lurking isn't a bad thing, it's just not as good as participating. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

    Comment

    • Mikey
      Technician

      50+ Posts
      • Sep 2009
      • 54

      #3
      Re: Introduction from South Wales

      Congratulations.

      Comment

      • minimerlin
        Senior Tech

        Site Contributor
        500+ Posts
        • Nov 2007
        • 851

        #4
        Re: Introduction from South Wales

        Good luck in your Developing venture...sorry could'nt resist the temptation!
        Please do not PM me without asking first.

        Comment

        • Tricky
          Field Supervisor

          Site Contributor
          2,500+ Posts
          • Apr 2009
          • 2620

          #5
          Re: Introduction from South Wales

          welcome aboard
          Attached Files

          Comment

          Working...