New to the forum, not in copiers/printers

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • JPiek
    Trusted Tech

    250+ Posts
    • Oct 2014
    • 435
    #1

    New to the forum, not in copiers/printers

    Registered to the forum a couple of days ago, seems i have to post on order not the get deleted from the memberlist

    I'm not having any quiestions jet, have been reading quite a bit though... And it seems i'm not the ony one tearing out hairs about the IRc 2020 Advance

    We have a couple of them out-on-lease, and most of them running ordinairy officejobs are doing quite fine. It's 2 of them that are bugging me. One being used for pretty high volumes, and one that's beiing abused as a Full-color plotter (architects) who print their designs and building plans on it.

    The latter one has given me quite some headackes, but at least now i know it's not me... It's the printer and it's abuse...
    Johan
    Tags: None
    • Aneurysm
      Administrator

      1,000+ Posts
      • Jan 2005
      • 1029
      #2
      Hi JPiek, welcome to Copytechnet.com!
      "Remain calm. All is well." -Chip Diller, Nov 1963

        Comment

        • Debs1964
          Service Manager

          1,000+ Posts
          • Oct 2010
          • 1687
          #3
          Re: New to the forum, not in copiers/printers

          Welcome
          There are 10 types of people in this world, those who understand binary maths and those who don't

            Comment

            • slimslob
              Retired

              Site Contributor
              25,000+ Posts
              • May 2013
              • 36807
              #4
              Re: New to the forum, not in copiers/printers

              glad to have you join us.

                Comment

                • livewire
                  Senior Tech

                  500+ Posts
                  • Sep 2011
                  • 607
                  #5
                  Re: New to the forum, not in copiers/printers

                  Hi JPiek, Welcome to CTN!

                  About your trouble better ask here:
                  http://www.copytechnet.com/forums/canon/

                    Comment

                    • blackcat4866
                      Master Of The Obvious

                      Site Contributor
                      10,000+ Posts
                      • Jul 2007
                      • 22929
                      #6
                      Re: New to the forum, not in copiers/printers

                      Welcome! =^..^=
                      If you'd like a serious answer to your request:
                      1) demonstrate that you've read the manual
                      2) demonstrate that you made some attempt to fix it.
                      3) if you're going to ask about jams include the jam code.
                      4) if you're going to ask about an error code include the error code.
                      5) You are the person onsite. Only you can make observations.

                      blackcat: Master Of The Obvious =^..^=

                        Comment

                        • JPiek
                          Trusted Tech

                          250+ Posts
                          • Oct 2014
                          • 435
                          #7
                          Re: New to the forum, not in copiers/printers

                          On advice from Canon self, i'm going to replace the laserunit this afternoon.... After replacing Magenta an Blue drum quite a few times, and the drum drive assy, and some ITB's ... But at 4% i don't suspect the drum. After cleaning the laser in-and-out it got slightly better... for the first 1-20 prints... then it came back... It always does, after 1-20 prints, or after a month or so...

                          If the problem comes back, i will make a thread for it, the printer deserves it by now
                          Johan

                            Comment

                            • igi
                              Service Manager

                              1,000+ Posts
                              • Apr 2009
                              • 1507
                              #8
                              Re: New to the forum, not in copiers/printers

                              you are most welcome

                                Comment

                                • JPiek
                                  Trusted Tech

                                  250+ Posts
                                  • Oct 2014
                                  • 435
                                  #9
                                  Re: New to the forum, not in copiers/printers

                                  Replaced the laser, did a ITB cleaning, a full grad. adjust, another cleaning.... Problem was gone...

                                  Oh, the problem was : First print ok, every next print had darker colors and Cyan streaks and stripes...
                                  app 5000 prints where made since last replacement of the Cyan drum.
                                  Johan

                                    Comment

                                    Previous template Next
                                    Working...