Service manual or service mode for the Samsung X7600GX

[RodneyJ]

Does anyone have the service manual or directions on how to get into service mode on the Samsung X7600GX? Its throwing a M2-1317 code=paper error

[Phil B.]

Re: Service manual or service mode for the Samsung X7600GX

Does anyone have the service manual or directions on how to get into service mode on the Samsung X7600GX? Its throwing a M2-1317 code=paper error

completely wrong forum for manual requests.... those requests per forum rules should go here ---> https://www.copytechnet.com/forums/s...nual-requests/

technical problems for Samsux units should go here https://www.copytechnet.com/forums/samsung/

[mga]

Re: Service manual or service mode for the Samsung X7600GX

Does anyone have the service manual or directions on how to get into service mode on the Samsung X7600GX? Its throwing a M2-1317 code=paper error

Hello Phil is correct place thread in service manuals area also just a note you will find that you get a lot more help if you become a contributer. But if you are unable to do that I could help you out with manual please place in correct area

[tsbservice]

Re: Service manual or service mode for the Samsung X7600GX

I have to say that Mark(mga) is one of finest gents I know here at CTN. There are some fellow techs who I will gladly meet and share good time with and two Marks from UK in my friends list(mga and raplma) are definitely in that list. Good for old England

[mga]

Re: Service manual or service mode for the Samsung X7600GX

I have to say that Mark(mga) is one of finest gents I know here at CTN. There are some fellow techs who I will gladly meet and share good time with and two Marks from UK in my friends list(mga and raplma) are definitely in that list. Good for old England

It pays to be nice stay safe my friend

[BillyCarpenter]

Re: Service manual or service mode for the Samsung X7600GX

I have to say that Mark(mga) is one of finest gents I know here at CTN. There are some fellow techs who I will gladly meet and share good time with and two Marks from UK in my friends list(mga and raplma) are definitely in that list. Good for old England

I second that. mga is a stand-up guy.

[Phil B.]

Re: Service manual or service mode for the Samsung X7600GX

I second that. mga is a stand-up guy.

I have to agree with both of you on Mark's reputation stand up guy and very helpfull

[mga]

Re: Service manual or service mode for the Samsung X7600GX

Stop it now {cheques are in the post}

Thank you.

[copier tech]

Re: Service manual or service mode for the Samsung X7600GX

Does anyone have the service manual or directions on how to get into service mode on the Samsung X7600GX? Its throwing a M2-1317 code=paper error

• Code: M2-1317
• Display:Paper Jam inside machine
• Description:A paper jam was detected in the fuser unit area.
• Remedy:

[slimslob]

Re: Service manual or service mode for the Samsung X7600GX

Hello Phil is correct place thread in service manuals area also just a note you will find that you get a lot more help if you become a contributer. But if you are unable to do that I could help you out with manual please place in correct area

I have found that you get a lot more tech responding if you post in the forum. Not everyone knows how to find items posted here.

[RodneyJ]

Re: Service manual or service mode for the Samsung X7600GX

Thanks so much guys. I really appreciate it. And I apologize for submitting to the wrong forum.
It was the fuser wrap error. The wierd thing about is that it took numerous attempts to get into service mode. The printer simply would not enter into the service mode. When it finally did I was able to reset the fuser wrap error. Up and running perfect now. Thanks again guys.

[Phil B.]

Re: Service manual or service mode for the Samsung X7600GX

Thanks so much guys. I really appreciate it. And I apologize for submitting to the wrong forum.
It was the fuser wrap error. The wierd thing about is that it took numerous attempts to get into service mode. The printer simply would not enter into the service mode. When it finally did I was able to reset the fuser wrap error. Up and running perfect now. Thanks again guys.

Samsux's are one of the worst to work on.. glad my ex boss dropped that line.