[Misc] Paper getting fold (ir adv 6265)

[gksapple]

HI
PAPER IS GETTING FOLD IN IR ADV 6265
*FOLDING ON THE LEAD EDGE (MIDDLE OF THE PAPER)
*MACHINE CONNECTED WITH FINISHER

ACTION TAKEN
*DISCONNECTED THE FINISHER AND THEN CHECKED BUT STILL THE SAME
*CHECKED THE PAPER PATH THERE IS NO OBSTACLES
*CHECKED WITH SIMPLEX COPIES STILL SAME
HERE I ATTACHED THE IMAGES KINDLY HAVE LOOK AND HELP ME

[Larhal]

Re: Paper getting fold (ir adv 6265)

HI
PAPER IS GETTING FOLD IN IR ADV 6265
*FOLDING ON THE LEAD EDGE (MIDDLE OF THE PAPER)
*MACHINE CONNECTED WITH FINISHER

ACTION TAKEN
*DISCONNECTED THE FINISHER AND THEN CHECKED BUT STILL THE SAME
*CHECKED THE PAPER PATH THERE IS NO OBSTACLES
*CHECKED WITH SIMPLEX COPIES STILL SAME
HERE I ATTACHED THE IMAGES KINDLY HAVE LOOK AND HELP ME

I Had a IR Advance 5045 doing the same thing in duplex mode. Found out that the inlet guide roller (small Orange one at the feed into the fuser) had worn bushings. Replace and all is well. Sorry not a cannon tech but found this out for the problem our customer was having.

There is a replacement part for it. sub assembly.

Good luck, Larhal