[Dead] Canon IRC2550 Half Blur Copy And Printing

[Hong1007]

Hi All,

I have one machine IRC2550, When i print PG10 the black will blur(top). but i do the auto gardation the black is very clear, i already change the new black drum unit, but still same the problem.

Any solution can solve the problem.

Thanks

[mosey1100]

Re: Canon IRC2550 Half Blur Copy And Printing

Hi All,

I have one machine IRC2550, When i print PG10 the black will blur(top). but i do the auto gardation the black is very clear, i already change the new black drum unit, but still same the problem.

Any solution can solve the problem.

Thanks

Have you tried cleaning the lasers with the cleaning wand on the door?

[zoraldinho]

Re: Canon IRC2550 Half Blur Copy And Printing

Have you tried cleaning the lasers with the cleaning wand on the door?

I agree.It may not be enough. It will be necessary to open and clean.

I hope that is not Pcb culprit.


laser-20070204-007.jpg

[JPiek]

Re: Canon IRC2550 Half Blur Copy And Printing

On PG10 you have white lines on Cyan and magenta in the same area also. I would also guess you got some toner spill on the laser...

[zoraldinho]

Re: Canon IRC2550 Half Blur Copy And Printing

White lines definetely maybe comes from developer.