If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
sir ir3045 was 2nd casette lifting is good but load paper signal iam changing casette assem bly and casette and wiring and dcboard chnanged but not solve this problem
sir ir3045 was 2nd casette lifting is good but load paper signal iam changing casette assem bly and casette and wiring and dcboard chnanged but not solve this problem
I think the top and bottom pick up assembly's are the same except a guide and bracket. You can swap them out to see if it is the pu assembly (swap guide and bracket). On other machines a flag usually breaks. The paper stops like it knows it has paper but does not show paper.
Comment